PLUG WIRES

[BlacknRedGT]

hey guys i was wondering what plug wires would be best for my 94 gt ......i have motorcraft platium plugs.....MSD cap....msd streetfire coilpack.........ive been looking at the 8.5 mm MSD wires and the 9mm ford racing wires but im up for any sugesttions

 

[Paul]

Doesn't matter. They're both fine. Pick one. The Ford wires are cheaper.

 

[2slo95fiveoh]

I've ran the FRPP 9mm wires in both my 5.0s and they have worked great.. I would take the platnium plugs out and put
a copper based plug in there place.. I am a strong believer in what kind of plugs it came from the factory, it should have in it..
NGK V-power is my personal recommendation.

 

[blackpony]

^^^ i agree with him except i like autolight copper plugs...anything but platinum will work.... and to answer your question, i like the look of the ffrp wires personally.... they all work great..

 

[LAFENATU]

Platinum plugs are not good for a small block 302.

FRPP wires are great and are very reasonable in price.

Im not a fan of MSD products and I have an MSD coil.

 

[DFG_magic]

My only gripe with the FRPP's on a 94-95 with smog and egr still attached is the end connectors. Very difficult to snap on. With the MSD's the connector is a longer reach. I'll be swapping frpp 9mm's for MSD streetfire 8mm's soon. Same product basically but the MSD's fit better. I've never had issues with MSD products.

 

[LAFENATU]

My Ford Racing wires fit perfect..

 

[SN95.ohh]

What is wrong with platinum plugs??

 

[LAFENATU]

What is wrong with platinum plugs??

Platinum plugs retain a lot of heat and can retain enough heat in our ignition type to actually ignite an air/fuel charge on the way in instead of during cumbustion.

Copper plugs

 

[tealgt]

just bought the autolite 3923's w/ blue 9mm ford wires $80 at a local store
running al edelbrock performer heads with a little shot :angel4:
stock distr. w msd box and coil...