MyLittlePony
Active Member
Your welcome to try yourself with your itty bitty hands if you do not believe us. Would you like to put a link on where to get a new factory actuator mechanism then as well? Or are we going through all this to install a replacement from a 25 yr old used car?
Aftermarket factory replacement:
https://lmr.com/item/LRS-21842BR/1994-98-Mustang-Door-Lock-Actuator
OEM:
https://lmr.com/item/LRS-21842B/94-98-Mustang-Door-Lock-Actuator
But I was assuming factory wiring/buttons were needed. If the dealer still carries them, and they’re too pricey, I imagine there are specialty salvage yards that could get you the part, but it’s probably best that you find and pull it yourself, because they may just cut the wires, not wanting to deal with the hassle you speak of.
It will still look factory to anyone who isn’t taking your door apart.
I was thinking about the buttons. Forgive me if I misread, but I did not see where factory door pull bezels and buttons were to be used. You can solder wires together from behind if you’re dead set on aftermarket, but I didn’t see anything about the actual cosmetic look of the finished mod.
Last edited: