Rearend part list

97stanger

Legend
Joined
Mar 22, 2006
Messages
5,880
Reaction score
100
Well, after driving my car I'm starting to get a noise coming from the rear, and checked the fluid, was full. Has me believe its a bearing or something. Figured, might as well build the rear while this has come up, considering the build I have now and a bone stock rear wont last long anyway.

The car already has 4.10 gears and a Edelbrock cover

Was thinking about this setup:

http://www.summitracing.com/parts/DTL-913A561/

http://www.americanmuscle.com/moser-31spline-88-axle-9498.html


Keep in mind this is just a street car, so I dont need any crazy setup. However, I am expecting to be in the 550-600 hp range so I do need some beef back there. What ya guys think?
 

DropTopPony

Post Whore
Joined
Jan 12, 2006
Messages
15,182
Reaction score
223
Location
South Jersey
I had issues with fitment on 2 sets of Moser 31 spl SN95 axels and would probably go with Strange or Superior next time.

The Detroit is a good unit, I use the Auburn Pro and its held up nicely over the last 8 years.
 
OP
OP
97stanger

97stanger

Legend
Joined
Mar 22, 2006
Messages
5,880
Reaction score
100
thanks for the heads up, know where I can check the Strange axles out at?
 
OP
OP
97stanger

97stanger

Legend
Joined
Mar 22, 2006
Messages
5,880
Reaction score
100
I also dont really understand the whole c clip eliminaters either, with a street car should I consider this, or just keep it how it is. Would I need anything else to do the install besides the axles/diff/fluid?
 

DropTopPony

Post Whore
Joined
Jan 12, 2006
Messages
15,182
Reaction score
223
Location
South Jersey
I have C clips in mine.
Jeggs and Summit probably sell the Superior and Strange axels.

You will need the install kit with all the bearings etc also.

With the fluid I would go Synthetic with the Ford friction modifier also.
I was told I didn't need it and my rear was clunky until I added it, nows its whisper quiet.
 
OP
OP
97stanger

97stanger

Legend
Joined
Mar 22, 2006
Messages
5,880
Reaction score
100
Yeah, I did a bit of research and I think I'm just going to keep mine c-clip as well
 

19mustang95

Legend
Joined
Jun 25, 2006
Messages
6,132
Reaction score
5
if i was building a rear end all over again, i would do the following.

- 03-04 Cobra 31 spline differential (carbon fiber clutches) - only $175ish through Tousely Ford
- Moser or strange 31 spline axles
- 9" ends instead of c-clip eliminators
 
OP
OP
97stanger

97stanger

Legend
Joined
Mar 22, 2006
Messages
5,880
Reaction score
100
he only reason I really like the True Trac is because of not having to worry about clutches burning out
 

Latest posts

Forum statistics

Threads
78,529
Messages
1,535,660
Members
16,185
Latest member
dmen76

Members online

Top