Removing Front Bumper

KzooMuscle

New Member
Joined
Dec 29, 2006
Messages
94
Reaction score
1
I've done a search, and I've followed the instructions. BUT, for the life of me, CANNOT get this freakin' thing off from underneath the headlights!! :angry4: Is there some technique, or tools I can use besides a screwdriver that could pry this F'r out!? Even my roommate tried to help me pull on it and neither of us could yank it out, and we're not weak by any means :thefinger:

Does anybody have any other suggestions????
 

ReplicaR

Well-Known Member
Joined
Mar 2, 2007
Messages
3,506
Reaction score
549
You don't have to remove headlights. Get a really thin screwdriver, slide it under the bumper which goes under headlights, and you should be able to take it off. There is a small tooth there that keeps in in place.
 

MadStang

Well-Known Member
Joined
Apr 12, 2008
Messages
4,553
Reaction score
114
Location
Escondido, Ca
ReplicaR said:
You don't have to remove headlights. Get a really thin screwdriver, slide it under the bumper which goes under headlights, and you should be able to take it off. There is a small tooth there that keeps in in place.

personally it's a lot easier to remove the headlights than work against them. So I should rephrase, you don't NEED to, but, it makes it a lot easier.
 

MEstang

Member
Joined
Jan 20, 2009
Messages
168
Reaction score
0
removing the lights will make it a lot easier, have done this a couple of times and always took out the lights.
 
OP
OP
K

KzooMuscle

New Member
Joined
Dec 29, 2006
Messages
94
Reaction score
1
Well, I removed the headlights this morning (I actually surprised myself, it was a lot easier than removing this stupid bumper has been), tried again at yanking this SOB out, and nothing, not even a little bit. This is quite upsetting. Something so simple like this shouldn't be such a PITA :angry7: :BangHead: I used so many tools, a pry bar, screw driver, pulling, twisting, F!
 

Gregsn95

Member
Joined
May 10, 2010
Messages
131
Reaction score
0
Did someone else have an after market one on before you got it? You never know stupid people couldve done anything to keep it there
 

Nick95GT

Active Member
Joined
May 20, 2009
Messages
440
Reaction score
0
jus yank it off man...i pulled mine off yesterday to install a brand new one and i couldnt figure out how to pull it off for a while either i was afraid if i pulled any harder i was going to break something but then me and my friend pulled as hard as we could on both sides and that lip just popped right off...you can do it man haha its easy
 
Top