Scraping/grinding noise coming from bellhousing.

[RAU03MACH]

another thing to check is maybe the throw out bearing seated on fork

 

[lwarrior1016]

Oriellys.

Typically they last longer than just a couple minutes, but the oreilly bearings don’t last.

Can you unhook the clutch cable from the pivot arm and push it rearward away from the clutch? That should stop the throw out bearing from spinning and help narrow it down.

 

[RAU03MACH]

it was always the auto zone ones that got me life time of replacment my ass

 

[97_slowbra]

Typically they last longer than just a couple minutes, but the oreilly bearings don’t last.

Can you unhook the clutch cable from the pivot arm and push it rearward away from the clutch? That should stop the throw out bearing from spinning and help narrow it down.

I can try that tommorow

 

[TreeScholar]

I know this is an old thread but did you ever figure this out because I have a scraping noise when I hit a bump or until I depress clutch, noise goes away when I accell and does not return when I decelerate