small nitrous question

[sk_stang]

can i use a 87-93 5.0 nitrous kit that uses a throttle body plate style kit and a 95 5.0, does it just bolt up to the throttle body like it would on the fox intake?

 

[mean green]

ya i think so

 

[sk_stang]

k awsome cause i can get a rank deal on a nitrous work 87-93 kit

 

[ryclef331]

i hope you haven't bought it b/c you're in for a surprise if you did. It will NOT bolt on there. The bolt pattern between a fox and sn95 throttle body is DIFFERENT. So NO your plate will NOT bolt up. You could probably grind a little here and there to make it "work" but it will look janky as hell.

 

[sk_stang]

so it wouldnt fit like between the intake and the intake elbow? and what companie can i go to for a cheap kit like that?

 

[Schiffy]

If you have a fox intake it'll work, otherwise like was previously said, it won't line up right.

 

[sk_stang]

alright so let me get it right, ill be buying a cobra intake from frpp with an edelbrock elbow... so if i put the nitrous throttle plate kit inbetween the elbow and the intake it will work? i was getting kinda confused. thanks

 

[95opal]

AS long as you put it between the intake and elbow it should be no problem.

 

[Paul]

You might have some difficulty getting your EGR tube hooked back up if you still have it installed.

 

[trav_19]

why not get a nitrous nozzle....instead of a plate and put it after your air filter?

 

[Paul]

why not get a nitrous nozzle....instead of a plate and put it after your air filter?

+1 That would make more sense.

 

[ryclef331]

alright so let me get it right, ill be buying a cobra intake from frpp with an edelbrock elbow... so if i put the nitrous throttle plate kit inbetween the elbow and the intake it will work? i was getting kinda confused. thanks

Ok IF you're doing it that way, that will be fine.

 

[sk_stang]

i might just go with that intake spray type... does any one have any experience with the zex wet kit 82023

 

[Paul]

How much are you looking to spray?

 

[sk_stang]

anywhere from 100hp to 150hp... the engine is still stock but ill be putting in a 4 bolt main dart block next winter so im not to worry about giving the stock block a bit more than safe.

 

[Paul]

If you're not planning more than 150 - then there's no reason to go to the trouble and expense of a plate kit. Get a simple wet kit with a nozzle and you'll be all set. Compucar, NX, Nitrous Works, etc...

Paul.