supercharging my 95gt

[supercharged 95]

Ok first let me introduce myself, I?m mark and I?m new to this form.
I have a 95 gt mustang and I just picked up a Kenny Bell 2.1 Blowzilla /Flowzilla supercharger with a gt40 intake.
I still have to pick up a set of heads. Found a set, but need some input. There listed as street/strip pro series
Aluminum heads. 210CC runner size, 60cc combustion chambers. 2.02 1.60 valve size. Fully assembled, premium hardware.
I was looking for a 90mm throttle body adaptor but it seems like no one makes One for a 95 mustang. Is it worth me having one made or
will a 75mm throttle body adaptor work good enough. That Leeds to my next question regarding throttle body?s, 90mm or 75mm throttle body?.
I have a 90mm mass air And 42lbs fuel injectors. I was going to also change out my transmission to a T-56. Please give me your input ?

 

[OnyxCobra]

if you're going to do heads I'd spend the money on a pair that is proven and a quality piece. I'm also going to say 75mm TB is going to be large enough.

 

[ivan12]

90mm TB sounds too big

 

[rz5.0]

with those heads your going to have pvt issues. look into some afr 165's. 90mm to big 75mm will be fine.
upgrade your fuel pump. colder plugs.

 

[supercharged 95]

thanks for the reply guys.yea im going to get a Walbro fuel pump.

 

[cobra259]

Take a look at me sig. 75mm is just fine.

 

[supercharged 95]

i just getting my fuel injectors.. which injectors are better, ford racing 42lbs injectors or Bosch Green 42 lb Pound Fuel Injectors?

 

[Venom351R]

Both are fine

 

[toyman]

I would check with KB to see what the Blowzilla/Flowzilla intake size is. The Blowzilla intake is only 70mm so a larger TB doesn't help. You just want to match the opening sizes.

 

[OnyxCobra]

the Flowzilla accepts up to a 90mm TB. I have a 70mm on mine.

 

[Naptown_Stang]

a 90mm throttle body i dont think will fit on a 95 nor is it necessary. It will hit the oil fill neck i think. 70 or 75 would work fine. Make sure those heads are fine and ready. any cams?

 

[OnyxCobra]

well unless you add the intake elbow the Flowzilla ends just like a fox body setup so if you ran that setup it would fit. the largest I've seen for SN95s is a 75mm.

 

[ProKiller]

well unless you add the intake elbow the Flowzilla ends just like a fox body setup so if you ran that setup it would fit. the largest I've seen for SN95s is a 75mm.

if you wanted a 90mm then it would be easier to do a fox conversion with that blower but a 75 is fine. i'm still running a 70mm with my combo and i'm pushing 500 to the ground. what brand heads are they?

 

[supercharged 95]

thanks for all the info. i only see three companies making 75mm throttle bodys for a 95. stack, bbk and summit racing. whick one would ou recomend

 

[OnyxCobra]

Professional Products makes one too, I like mine because it matches my polished Flowzilla intake but it took a little tweaking when i got it.