RAU03MACH
Legend
i did like the bbk valve covers
I don't mind their tuned length headers that I'm running, or the hpipe or the CAI. those are pretty simple items though so idk what issues there would be to have lolIs BBK known for making ANY quality products? Too my knowledge once Mac was gone they became the defacto cheap option for everything.
What is exactly is considered a hanging idle?
Lots of cracked headers from crappy welds and their Ceramic Coating can be fairly spotty. Mid Pipes are known to not seal up well especially on the passenger side header. CAI being made from Steel adds heat. A lot of ok products if you are on a budget you can make them work. But nothing that is ever going to be considered top shelf stuff.is there anything other than the tb that is bad?
I had a set of their headers for a while. They were not ceramic but chrome plated and yea that didn't last long but chrome plated headers never will. I sent the JBA I was replacing them with to nitroplate about a month before they quit doing small batch jobs and now that has held up very nicely both in fit and finish but those two brands are not really an apples/apples comparison.Lots of cracked headers from crappy welds and their Ceramic Coating can be fairly spotty. Mid Pipes are known to not seal up well especially on the passenger side header. CAI being made from Steel adds heat. A lot of ok products if you are on a budget you can make them work. But nothing that is ever going to be considered top shelf stuff.
Thanks! I hadn’t seen these.Trick Flow for $125 - https://lmr.com/products/94-04-Mustang-Intake-Manifolds#6171
Accufab Plenum for $260 - https://accufabracing.com/product/mustang-4-6l-2v-1996-2004-plenum/?v=7516fd43adaa
Not even sure if those are the best prices on those pieces but they are out there. SR Performance is American Muscle's house brand. Not the highest quality stuff.