Update on my car

[97stanger]

Well, I just got my car back from my tuner. My current numbers were 343rwhp and 365tq. I installed a Paxton front mount, vortech mini race, and put on a 3.12 pulley. I was expecting a little higher numbers, but i'm still happy. I put out exactly 370rwhp, 380tq. I'm seeing about 11psi. The mean reason i went with such a small pulley is because next, i plan to do some crower stage 2 blower cams, which will drop my boost even more, and will save me the headache of having to change pulley sizes yet again. All in all, the car feels soooo much stronger down low now and definately worth the upgrade. Like I said, i plan to do cams next, which my tuner said is the biggest restriction on my car now and should yield me about 30rwhp. This will be the last mod i do for power, and finally a stall converter and my performance mods will be complete.....for now :banana:

 

[gt96stang]

NICE! :thumb: :thumb:

 

[Black97GT]

Awesome man good to hear from you O0.

 

[low9sGT hahajk]

nice numbers! I wish my car was running 11 psi..I'd be like :bunny3:...

 

[nesqwick_05]

what you need is a s281 spoiler to finish the look...

 

[97stanger]

thanks for the props guys! im really happy with the results.

I will eventually get to the spoiler, but honestly a spoiler is the least of my worries right now. before that i plan to finish maxing out my motor, building the rear, racing seats, suspension, and then ill get to it O0

 

[QTRHRSE]

not bad at all man, esp. considering its auto

should be a fun car

 

[Purple97GT]

Awesome! Post up the timeslips asap! I'm betting mid to low 12's.

 

[97stanger]

thanks guys! Yeah i definately want to run it soon, but before i do that i NEED some control arms and radials

 

[AaRoN]

O0

 

[DropTopPony]

Its just getting better and better O0

I bet you gain more then 30rwhp from those cams.

Before you decide or buy new cams you should consider what ones you want.
You could get the Crower ST2 NPI Blower cams or you could get the Crower offset retainers to use in your NPI heads and use Crower ST2 PI Blower Cams and make more power for just alittle more money. I've seen guys gain 60rwhp with those cams and they have a nice lope to them.

 

[97stanger]

Before you decide or buy new cams you should consider what ones you want.
You could get the Crower ST2 NPI Blower cams or you could get the Crower offset retainers to use in your NPI heads and use Crower ST2 PI Blower Cams and make more power for just alittle more money. I've seen guys gain 60rwhp with those cams and they have a nice lope to them.
[/quote]

OOOO, i never thought of that. Only thing is, dont you think even say I only got 30rwhp from the non pi s/c cams that 400rwhp should be about it through an auto? I mean, i would love to gain 50 or even as you said 60rwhp from the crower's PI cams, but then i would be pushing upwards of 430-440rwhp...

 

[nesqwick_05]

u want blow it if you stay outta the rpms enough...

 

[scarface]

thats great man!

 

[dutman98]

You have one sweet ride man.....Mean looking and the Hp's to back it up. :thumb:

 

[OnyxCobra]

very nice man, got some good gains and definitely nothing wrong with those numbers O0

 

[nesqwick_05]

ur gunna love the car more with a s281 spoiler trust me, every time i go drive mine i do a :banana: dance because it looks so sexy

 

[97stanger]

thanks for the compliments guys

and nes - maybe you should look into getting me one for xmas :drunk:

 

[Pennywise2]

Good job and excellent numbers! :thumb:

 

[nesqwick_05]

thanks for the compliments guys

and nes - maybe you should look into getting me one for xmas :drunk:

if i had me a different spoiler i woulda just sent you mine free of charge, maybe next time after i pick out my new spoiler, but what are you gunna get me :banana: