What Did You Do To Your Car Today?

[Musturd]

Looks clean for $500!

It was 5 mins from my house in a guys back yard the last two years . I would have seen it and grabbed it long ago . I drive past the house all the time but he’s gotta fenced in yard so I never seen it . Definitely pretty clean and should be a quick flip with some clean up and some work . I’ve got some 99 cobra wheels to throw on it .

 

[joemomma]

Picked up the Innova 3145 OBD-I reader on Friday. Haven't had a chance to pull codes yet. Might do that this afternoon if work slows down for a minute.

 

[RAU03MACH]

Picked up the Innova 3145 OBD-I reader on Friday. Haven't had a chance to pull codes yet. Might do that this afternoon if work slows down for a minute.

Have you thought about this Bluetooth pick up
Works dam good
I have a couple of them it's tied to an app on the phone
Up date is evey time it is used

I have had no problems with these devices
Not bad for the price

 

[ttocs]

Man it sucks I have been wanting to take advantage of the nice weather and get back into it but after dislocating my shoulder over 2 months ago now I just can't. My EDS crap leaves me able to dislocate joints in my sleep(literally) but I have never done my shoulder before. It feels like it is %80 better but I still have problems reaching over my head or if I try to stretch to reach something, or push or pull something, almost anything really... I keep reinjuring/dislocating it every few weeks when I just open a door or get out of bed and it seems like it is two steps forward 3 steps back. I don't think it is bad enough for surgery so hopefully some kind of PT can help it as this sucks. As I said I am pretty sure I have injured/strained/disclocated almost every joint except my shoulder and until now I didn't realize how often I use it.

 

[joemomma]

Have you thought about this Bluetooth pick up
Works dam good
I have a couple of them it's tied to an app on the phone
Up date is evey time it is used View attachment 35312View attachment 35314View attachment 35313View attachment 35315View attachment 35316View attachment 35317View attachment 35318View attachment 35319View attachment 35320View attachment 35320View attachment 35321

I have had no problems with these devices
Not bad for the price

That looks like an ODB-II, my car is ODB-I only.

 

[RAU03MACH]

ya
that is correct , i think they make an adaptor harness to plug in piggy back

 

[joemomma]

I checked their website, says it isn't compatible with ODB-I

 

[weendoggy]

Well, after last weeks rainy day breakfast run, I haven't done a damn thing to it. Sitting on the rack and it'll be there for two more weeks while I'm at the NV house. Then, all hell will break loose. New track tires, clean it up good and get ready for my Laguna Seca weekend the end of June. I am enjoying reading what everyone else is doing though.

 

[optionizerSS]

Clayed, buffed and waxed. Still have to do the passenger side

 

[tmwsccsh]

Clayed, buffed and waxed. Still have to do the passenger side
View attachment 35356View attachment 35357

Dang that's good

TMW

 

[optionizerSS]

Dang that's good

TMW

Thanks. Looked good when we bought it a few months ago but wanted to clay it

 

[RAU03MACH]

I put plates back on my mach1 had the tags dropped for a few years
Now it can be driven
And raise hell

 

[NEW EDG]

My 4 yo and I took my almost 2 yo out for his first ride in the Mustang. 2 car seats and a driver that's 6'4" made things a little rough but brought me back to my high school days when me and a buddy would cram two chicks in the back and I'd have to bury my knee in the dash everytime I have to use the clutch. The journey was a success but also got me thinking it might be time for a bigger boat.

 

[white95]

Washed the pretty one.

 

[tmwsccsh]

Checked there was no more air in the cooling system, topped it up and also the transmission fluid following the radiator change a couple of weeks ago, then took it for a drive just to be sure it was still working fine.

Which it was

TMW

 

[Daryl]

Finally upgraded from my rickety 2-ton floor jack that takes 35 short strokes to get to full mast to a 3-ton quick lift low profile . Good deal with coupon, only $119
This is one of the few things I buy from Harbor Freight. Jacks: good; tools: soft metal, fail easily.

 

[RAU03MACH]

Just adding a few more items
And done

 

[RAU03MACH]

 

[Daryl]

View attachment 35396

Just adding a few more items
And done

Why? Is the sun a problem in NM? LOL!

 

[optionizerSS]

Went to a cruise yesterday. One of the members from our club was running it. 26 of us went and had a separate reserved parking. We couldn't stay long cause of our granddaughters birthday party but was cool.
Today entered it in the local Memorial Day parade. Last year there were about 10 cars in the parade. Today I think we were the only one but weather was iffy so that's probably why. I made 2 PVC blocks with notches in to slide into the rear door trim and mounted flags in them. Worked great.