Which size injectors

[Corndiddly]

Im going to be running TFS tw 170 heads, TFS stage one cam, Edelbrock upper and lower, and long tubes with 4 pipe. Will 24 lb injectors be big enough or will I need bigger? Also, whats the difference between the EV1 body and EV6 body?

 

[slow90coupe]

24s will be perfect. 19s will be ok, but the 24s will be exactly what the car needs to be right.

 

[ram360]

You need EV1 and go with 30's

 

[whiplash473]

if you're gonna buy them i'd just go with 30s but if you found a deal on a set of 24s then they'll be just fine

 

[the5.ohh]

24's are good for like 325 iirc, you should be fine

 

[hottwheels04]

24s will be perfect. 19s will be ok, but the 24s will be exactly what the car needs to be right.

This, I have a set of 24lb injectors for sale for mad cheap!! LET ME KNO!!

 

[ram360]

Your going to be running those 24's at 80% duty cycle with that h/c/i. Spend the extra few dollars and go w/ the 30's.

 

[Corndiddly]

Thanks for the help, I will be going with the #24 ers.

 

[Corndiddly]

Your going to be running those 24's at 80% duty cycle with that h/c/i. Spend the extra few dollars and go w/ the 30's.

I got a buddy with 24 lb injectors off his 4v I'm getting for cheap. So I would have to spend a good amount more.

 

[the5.ohh]

If anything sell those 24s your getting and get a set of 30s, might be better off.

 

[JPhilBradley]

If anything sell those 24s your getting and get a set of 30s, might be better off.

X2

 

[Addermk2]

24#ers are fine. 30#ers will run most strokers.

 

[ttocs]

Running that same setup now with the exception of a different intake/exhaust. Only part I found that needed upgrading after going to 24's was the fuel pump as it was starting to max out according to the dyno.