Window Problem?

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
A few weeks ago my driver side window wont go down without me pushing it,same thing to go up,but i was able to heard the motor running and a clicking noise so i decided to take the window motor out and surprise the bushing were worn out,so i went to the parts store and bought the bushings and got it fixed now it works like new up and down.now im gongn to tell/show you how and what you need:

Tools needed:

*Bushing can be found at autozone,O'Reillys or Advance auto parts for about $6.99

Part No. is 74410 specs of bushings are :

Diameter:.595"
Height:.429"
*Phillips
*5/16 socket
*Flat screwdriver
2825260110102188418S425x425Q85.jpg

2576814220102188418S425x425Q85.jpg




Step 1: ok first thing open the door (ttt)

Step 2: now see the black part that you use to shut the door that needs to come off,on the top of it stick the flat screwdriver
and pop it loose,once that is done puul it straight up, on the back of it there is the power mirror switch unplug it, then
unscrew the two screws to free the lock/unlock harness

2410101120102188418S425x425Q85.jpg



Step 3: Take off the two screws that are near the center of the door panel.

Step 4:Now pull the panel door up and then feed the door opening handle thru the door panel.now the door panel is off

Step 5:the window operator i s east of the door,peel back the plastic as necessary to get to it,then unplug it,now fish it thru the
little hole

2999199660102188418S425x425Q85.jpg


Step 6:Take the speaker off it has 4 screws

2798354020102188418S425x425Q85.jpg


Step 7:now peel back the plastic as necessary to get to the 3 bolts holding the motor

2917872640102188418S425x425Q85.jpg


2939117150102188418S425x425Q85.jpg


Step 8:takes off the three bolts holding the motor,make sure you are ready to catch it or will fall inside the door (no biggie),get it
out thru the speaker hole.

Step 9:eek:pen the motor by uncrimping the two crimps and pop the cover off surprise !!!!!!all that stuff is not garlic is whats left of
your bushing,at the end of the shaft there is a clip,spread its ears and slide the clip right off (pics no.1)

2867095100102188418S425x425Q85.jpg


2732934250102188418S425x425Q85.jpg


2050779440102188418S425x425Q85.jpg


2967935220102188418S425x425Q85.jpg



Step 10: pull the gears out and clean the inside

2192631250102188418S425x425Q85.jpg


Step 11:put your new bushings in

2825260110102188418S425x425Q85.jpg


2737505900102188418S425x425Q85.jpg


2622723340102188418S425x425Q85.jpg



reassemble everything and you are done



I hope this helps everyone as it helped me.


NOTE: Passenger is almost same thing
 

Paul

Legend
Joined
Apr 30, 2007
Messages
9,859
Reaction score
255
Awesome how-to. Thank you. Please PM one of the moderators so this can moved to the how-to section and archived. Great thread.

Paul.
 
OP
OP
Javi

Javi

Mythic Level
Joined
Sep 8, 2007
Messages
27,321
Reaction score
57
Location
Th3 405
Paul said:
Awesome how-to. Thank you. Please PM one of the moderators so this can moved to the how-to section and archived. Great thread.

Paul.


Thank you Paul....is already in the How to section.................i will PM RYCLEFF331 to see if it can be sticky
 

Paul

Legend
Joined
Apr 30, 2007
Messages
9,859
Reaction score
255
I've never had to mess with power window motors, so maybe now I'll be a little more prepared when the time comes. :)
 

Forum statistics

Threads
78,555
Messages
1,536,137
Members
16,201
Latest member
jgib8795

Members online

Top