Would this set up work on my car?

Demolisher

Active Member
Joined
Aug 14, 2006
Messages
261
Reaction score
0
shit hopefully cuz i thnk im gonna do the same thing. anybody dissagree with this site?
 

rob10s2

New Member
Joined
Oct 3, 2006
Messages
78
Reaction score
0
im going to do that build as soon as i have the coin. those afr's are expensive. but yeah, i trust car craft, subsciber since 1999, so itll work. :dancing6:
 

SvtBlack95

Well-Known Member
Joined
Jul 27, 2006
Messages
2,594
Reaction score
1
very impressive i wonder how much it would make with a blower ???i might look into this
 

SvtBlack95

Well-Known Member
Joined
Jul 27, 2006
Messages
2,594
Reaction score
1
i dont see why it wouldnt as long as you follow what they did... make sure its a motor with forged internals so it can withstand the power easily i have an 89 shortbloack in my cobra and it handles good power
 

95Grandtouring5.0

Well-Known Member
Joined
Aug 30, 2006
Messages
1,095
Reaction score
0
SvtBlack95 said:
i dont see why it wouldnt as long as you follow what they did... make sure its a motor with forged internals so it can withstand the power easily i have an 89 shortbloack in my cobra and it handles good power

You don't think a stock 95 gt block could take 400 hp?
 

SvtBlack95

Well-Known Member
Joined
Jul 27, 2006
Messages
2,594
Reaction score
1
im pretty sure it could make it its the pistons i would be worried bout cuz their not forged
 

Lightning Struck

Post Whore
Joined
Jan 12, 2006
Messages
23,204
Reaction score
2
SvtBlack95 said:
im pretty sure it could make it its the pistons i would be worried bout cuz their not forged

+1 on the crappy pistons and rods :-\
 

Lightning Struck

Post Whore
Joined
Jan 12, 2006
Messages
23,204
Reaction score
2
95Grandtouring5.0 said:
well how much are forged pistons and rods for a 302?

you can get a nice set for around 500 bucks, look thru some stang magazines..........or right here on the net, you can find all kinds of piston/rod sets for great prices.
 

SvtBlack95

Well-Known Member
Joined
Jul 27, 2006
Messages
2,594
Reaction score
1
umm shouldnt be to much i think considering it would be stock pistons just make sure their stock forged pistons, or maybe you can look for a stock 88,89,91,92 shortblock wicked cheap maybe ebay or the corral.net i wouldnt say no more then $250 for a stock shortblock with decent miles rip it apart clean the parts new rings bearings and then you good to go from there
 

Lightning Struck

Post Whore
Joined
Jan 12, 2006
Messages
23,204
Reaction score
2
SvtBlack95 said:
umm shouldnt be to much i think considering it would be stock pistons just make sure their stock forged pistons, or maybe you can look for a stock 88,89,91,92 shortblock wicked cheap maybe ebay or the corral.net i wouldnt say no more then $250 for a stock shortblock with decent miles rip it apart clean the parts new rings bearings and then you good to go from there

yea he could do that, and for a mild motor that would be fine......but what if he decides he wants to get blown or spray it ;D I would rather have a set of DSS / Eagle / Ross pistons in my motor rather than a set of stock forged ones :) Just some food for thought
 

SvtBlack95

Well-Known Member
Joined
Jul 27, 2006
Messages
2,594
Reaction score
1
once again snake you have sounded like a genius good job :thumb:
 

Lightning Struck

Post Whore
Joined
Jan 12, 2006
Messages
23,204
Reaction score
2
SvtBlack95 said:
once again snake you have sounded like a genius good job :thumb:

well its true he could get a set out of a forged 5.0 stock motor and they would prob work great, ....................but who is ever satisfied with what they have ::) we ALWAYS WANT MORE and he probally will to, so that's why I say go ahead spend a little more and get some top notch stuff that can handle whatever he decides to throw at it :thumb:
 

95Grandtouring5.0

Well-Known Member
Joined
Aug 30, 2006
Messages
1,095
Reaction score
0
Snakebit said:
SvtBlack95 said:
once again snake you have sounded like a genius good job :thumb:

well its true he could get a set out of a forged 5.0 stock motor and they would prob work great, ....................but who is ever satisfied with what they have ::) we ALWAYS WANT MORE and he probally will to, so that's why I say go ahead spend a little more and get some top notch stuff that can handle whatever he decides to throw at it :thumb:

Im sure a kenne bell would also coeme in the future
 

Latest posts

Forum statistics

Threads
74,896
Messages
1,452,726
Members
13,574
Latest member
ZED

Members online

Top