326 hp gt40 cobra intake e303 cam HCI swap on a 94 GT
--------------------------------------------------------------------------------
Ok second dyno numbers back up the first! 1994 5.0 is pushing 326 hp! Since these numbers are so far above what the general consensus is for a 5.0 with my mods I used my Mach 1 as a control. Its not a scientific method but at least the new dyno shop is providing numbers consistent with a totally different dyno shop with the same Mach 1.
I had a dyno run for my Mach 1 last year at a different shop and got 307.9 hp. Since that run I added an intake spacer and ud pullies to the Mach. New dyno numbers at the new shop garnered 321 hp for the Mach. (dyno sheets attached) Sounds about right from what I've heard the spacer and ud pulley mods gain. I'm judging the dyno numbers from this new shop as sound since the numbers from the two separate shops seem to be the expected gains for the mods I've put on the Mach 1.
Now the 5.0
I ran my 5.0 at this new shop on two different days. the first numbers were 324 hp. The second time around we got 326 hp.The next step is to take the 5.0 to a third dyno shop to further verify the hp trq numbers.
mods are:
95 cobra upper and lower intake with 1 inch spacer
gt40 iron(?) heads, 1.7.roller rockers exhaust only, 1.6 roller rockers on the intake valves
ford e303 cam
255 lph walbro fuel pump, 24# injectors
mac underdrive pullies
76mm c&l CAI intake, 70mm throttle body
mac shorty headers, mac o/r prochamber,mac cat back
msd 6 box, msd wires, platinum plugs,msd billet distributor,
3.73 gears
1st two dyno sheets are from the Mach 1, 2nd two dyno sheets are from 94GT:
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85017d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-1st-dyno-mach-1-08-08.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85018d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-2nd-dyno-mach-12-09.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85019d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-1st-dyno-5.0-oct-2009.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85020d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-2nd-dyno-5.0-dec-2009.jpg
--------------------------------------------------------------------------------
Ok second dyno numbers back up the first! 1994 5.0 is pushing 326 hp! Since these numbers are so far above what the general consensus is for a 5.0 with my mods I used my Mach 1 as a control. Its not a scientific method but at least the new dyno shop is providing numbers consistent with a totally different dyno shop with the same Mach 1.
I had a dyno run for my Mach 1 last year at a different shop and got 307.9 hp. Since that run I added an intake spacer and ud pullies to the Mach. New dyno numbers at the new shop garnered 321 hp for the Mach. (dyno sheets attached) Sounds about right from what I've heard the spacer and ud pulley mods gain. I'm judging the dyno numbers from this new shop as sound since the numbers from the two separate shops seem to be the expected gains for the mods I've put on the Mach 1.
Now the 5.0
I ran my 5.0 at this new shop on two different days. the first numbers were 324 hp. The second time around we got 326 hp.The next step is to take the 5.0 to a third dyno shop to further verify the hp trq numbers.
mods are:
95 cobra upper and lower intake with 1 inch spacer
gt40 iron(?) heads, 1.7.roller rockers exhaust only, 1.6 roller rockers on the intake valves
ford e303 cam
255 lph walbro fuel pump, 24# injectors
mac underdrive pullies
76mm c&l CAI intake, 70mm throttle body
mac shorty headers, mac o/r prochamber,mac cat back
msd 6 box, msd wires, platinum plugs,msd billet distributor,
3.73 gears
1st two dyno sheets are from the Mach 1, 2nd two dyno sheets are from 94GT:
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85017d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-1st-dyno-mach-1-08-08.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85018d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-2nd-dyno-mach-12-09.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85019d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-1st-dyno-5.0-oct-2009.jpg
http://www.allfordmustangs.com/forums/attachments/94-95-tech/85020d1260075996-1994-mustang-5-0-full-bolt-gt40-hci-324hp-357-trq-2nd-dyno-5.0-dec-2009.jpg