347 Cobra worth???

Kielianaire

New Member
Joined
May 26, 2010
Messages
10
Reaction score
0
So im sure you guys hate questions like this, but i think this is where i will get the best answer. So my question is, is a 1994 cobra with a mostly new 347 stroker worth 8000?

Here are some of the details:

About 500 HP. Car has less than 10K on the newly rebuilt 347 stroker engine. Pretty much everything on the car is aftermarket racing parts a few include: Nitrous hookups, hooker headers, custom dual 3" exhaust, hurst shift, tremec transmission, edelbrock aluminum valve covers, custom cold air intake, interior autometer gauges, MSD ignition system, and much much more.

Id like to hear your guy's 2cents on what it might be worth and if this is a good deal.
Thanks guys
 
OP
OP
K

Kielianaire

New Member
Joined
May 26, 2010
Messages
10
Reaction score
0
He told me a ton of details, just to many to remember. nitrous hook ups were put on, but never sprayed. And he said he would take it into the shop to have everything checked out before selling, so i might be able to have them dyno tune it as well to prove it. I checked the car out and drove it and everything seemed fine. I didnt want to get on it to hard (didnt want to hot rod the thing that aint mine yet) but felt like plenty of power for how much i did.
I know im rusty on the details and that makes it harder to determine what it might be worth.
 

LAFENATU

Well-Known Member
Joined
Nov 25, 2007
Messages
3,555
Reaction score
1
Kielianaire said:
He told me a ton of details, just to many to remember. nitrous hook ups were put on, but never sprayed. And he said he would take it into the shop to have everything checked out before selling, so i might be able to have them dyno tune it as well to prove it. I checked the car out and drove it and everything seemed fine. I didnt want to get on it to hard (didnt want to hot rod the thing that aint mine yet) but felt like plenty of power for how much i did.
I know im rusty on the details and that makes it harder to determine what it might be worth.

What heads/cam/intake are on it?

Tell him to email the details.
 
OP
OP
K

Kielianaire

New Member
Joined
May 26, 2010
Messages
10
Reaction score
0
good call LAFENATU!!
it is late now, so i will give him a call tomorrow and see if he can mail me a list of all the details on the car.
.... wish i would have thought of that sooner....
 

Venom351R

Legend
Joined
Mar 8, 2008
Messages
5,194
Reaction score
265
Location
Maine
Its worth as much as someone is willing to pay for it lol. It sounds like a nice car but get more details and some pics.
 

Addermk2

Well-Known Member
Joined
Mar 7, 2006
Messages
2,534
Reaction score
56
I'm not gonna lie... I got a little excited to see this thread... I thought someone was looking to buy MY car.

I guess im still stuck with it... oh well
I suppose the Jeep will just have to wait.
 
OP
OP
K

Kielianaire

New Member
Joined
May 26, 2010
Messages
10
Reaction score
0
Sorry it took so long. Just now got the details mailed to me.

94 Mustang Cobra SVT,
--less than 10K miles on new engine,
--347 Stroker (Roller engine),
--Nx Nitrous oxide kit,
--77mm BBK Throttle body,
--Edelbrock Victor Jr.aluminum heads,
--Edelbrock Victor Jr. upper intake,
--Edelbrock Victor Jr. lower intake,
--New Ford racing hydraulic roller lifters,
--New Hydraulic Comp Cam,
--New 437LB.Comp Cam Triple Valve Springs,
--Comp Cam Magnum 2 Pushrods,
--1.6mm Rocker Roller Arms,
--Polished Aluminum Ford racing valve covers,
--SRP Forged aluminum pistons,
--Scat Forged steel connecting rods,
--Scat Forged steel crank shaft,
--New Comp Cam Double Roller timing chain,
--New Comp Cam crank and cam gears,
--All new Clevite crank and rod bearings,
--New Ford racing oil pump,
--New motorcraft starter,
--New Zoom high performance clutch kit,
--New oxygen sensors,
--New Ford racing 9mm plug wires,
--Moroso Street/ Strip 7.5 quart oil pan,
--1 3/4" Long tube Hooker Headers,
--Light weight steel High Torque Fly Wheel,
--Lakewood Safety Bell Housing,
--3" Stainless Steel Magna-Flow Exhaust System,
--New Lakewood Clutch Fork,
--Hurst Shifter,
--Tremec T-5 3550Transmission,
--After market Steel Harmonic Balancer,
--Lakewood safety Flex Plate,
--Engine built with ARP Studs,
--After market Aluminum light weight drive shaft,
--Steel drive shaft safety guard,
--New brake pads,
--New rear rotors,
--45K. volt MSD Blaster coil,
--Heavy duty fuel injectors,
--Dual Magna Flow Mufflers,
--Autometer (Phantom) Tach,air/fuel mixture, fuel pressure,nitrous and temperature gauges.

These are some of the basic things
 

LAFENATU

Well-Known Member
Joined
Nov 25, 2007
Messages
3,555
Reaction score
1
Engine sounds stout.

What condition is the car itself in? Have you seen pictures AND does he have paperwork to back up his info?
 

Addermk2

Well-Known Member
Joined
Mar 7, 2006
Messages
2,534
Reaction score
56
guaranteed he is running a 100 shot or better

maybe I should start advertising my car as a 525hp 347 cobra.....
 
OP
OP
K

Kielianaire

New Member
Joined
May 26, 2010
Messages
10
Reaction score
0
well the car WAS great... however, i just found out the car was totaled the other day. so it looks like i am back to looking for a car again.... What horrible luck huh...

btw Addermk2, your cobra looks SIIICCKKK! reminds me of my cobra
 

det_riot

Well-Known Member
Joined
Apr 26, 2009
Messages
3,478
Reaction score
99
Location
Dearborn
Kielianaire said:
well the car WAS great... however, i just found out the car was totaled the other day. so it looks like i am back to looking for a car again.... What horrible luck huh...

btw Addermk2, your cobra looks SIIICCKKK! reminds me of my cobra

buy his cobra, its for sale too!
 

Addermk2

Well-Known Member
Joined
Mar 7, 2006
Messages
2,534
Reaction score
56

Latest posts

Forum statistics

Threads
78,530
Messages
1,535,667
Members
16,185
Latest member
dmen76

Members online

Top