357w cam choice

[auto_x5.0]

I'm looking to see if anybody here has personal experiences with the cams I have
sitting on my shelf. I have either an AFM n-71 cam, trick flow stage 3 cam, or
CompCams xe282hr. My build is a 10.2-10.5:1, trick flow 206 race heads, ported
edelbrock victor jr intake, holley 750dp, longtubes, o/r x-pipe, slp loudmouth
catback, c4 trans with whatever stall I end up needing.

My question is,
which cam would be better?

 

[white95]

Recently, I faced this dilemma and went with the TFS-3 cam.. I have no dyno numbers or track times to give, motor isn't fully broken in yet.

 

[auto_x5.0]

Why did you choose the tfs stage 3?

 

[tommybunz]

give specs on the cams

 

[auto_x5.0]

Anderson n-71:
.576 lift
232/240 duration
110 lsa

Stage 3 TFS:
.574 lift
236/248 duration
110 lsa

CompCams xe282hr"
.565/.574 lift
232/240 duration
112 lsa

 

[white95]

Edit:

Stage 3 TFS:
.574 intake .594 exhaust
236/248 duration
110 lsa

I chose the TFS-3 cam because it was a cheap, off-the-shelf grind that would suit my 410w.