500 whp maybe?

[joshmartin]

ok im goin to have a forged bottom end with light weight internals , full pi swap with ported pi heads and aftermarket cams and full boltons with long tubes mac xpipe with 1 chambers , and ofcourse the usual full bolton crap... along with a direct port 200 shot of nitrous.... with a dyno tune wonder if 500whp is gonna happen? :thumb: :boink:

 

[low9sGT hahajk]

Excluding the 200 shot, what you mentioned should pull 300+whp then with the added 200 shot, that would make 500...so uh..seems like it?
Note: Non-expert guess.

 

[joshmartin]

lol 200 shot doesnt mean it will net 200whp it could with the tune and the changing of some jets to lean it out a lil more.... :slap:

 

[Lightning Struck]

good question.......I have no idea

 

[AaRoN]

It's possible...

 

[low9sGT hahajk]

lol 200 shot doesnt mean it will net 200whp it could with the tune and the changing of some jets to lean it out a lil more.... :slap:

I didn't say with the added 200rwhp shot. I said: "with the added 200 shot" - Meaning if you have 300+ rwhp NA, then a 200 shot should make 500. or more..or a little less. Either way, if you do what you've mentioned, you'll be fast, whether you're off on your calculations or not.

 

[joshmartin]

yeah i can see a rearend and transmission purchase in the near future lol axles also hah

 

[AaRoN]

yeah i can see a rearend and transmission purchase in the near future lol axles also hah

yeah, at least

 

[97stanger]

if i were you id beef up the tranny/rear/fuel system before even seeing 500rwhp

 

[joshmartin]

fuel system will see a warlbo 255 , 30lb injectors and professional products fuel rail w/ regulator system.... as far as the tranny , axles and rear go ima let them break or start wearing out b4 i upgrade lol ill have 9k in this car after its all said and done lol and 500whp in a 9k car is sweeeet :crazy2:

 

[AaRoN]

if i were you id beef up the tranny/rear/fuel system before even seeing 500rwhp

+1

 

[Jrgunn5150]

You'll be close, you may want more injector for a 200 shot though. And a different intake.

 

[joshmartin]

yeah ima go with 30lb injectors and it will ofcourse have a aluminum lower intake

 

[Jrgunn5150]

I would even recomend using direct port with that much juice.

 

[joshmartin]

oh of course no chance in hell id spray 200 threw a nozzle lol

 

[voidfinger]

i think most kits are rated at the rwhp thing... i think zeks is the only flywheel hp one that comes to mind. so a 200 shot should give you 200 rwhp... maybe a little less since such a big shot, but man your gonna love that tq curve haha

 

[Jrgunn5150]

i think most kits are rated at the rwhp thing... i think zeks is the only flywheel hp one that comes to mind. so a 200 shot should give you 200 rwhp... maybe a little less since such a big shot, but man your gonna love that tq curve haha

Most kit's are rated Flywheel, on a 350. It's just some math they do based on the size of the jet.

 

[voidfinger]

o ok, well i was told somethign different lol. :dunno:

 

[low9sGT hahajk]

o ok, well i was told somethign different lol. :dunno:

I've heard the same..depends on the kit, I guess.

 

[joshmartin]

Ok boys its been a year and the car will be done next week lol with new paint cobra r hood , s281 spoiler , new wheels etc

anyways its forged bottom end 11:5 compression, mod max cams , ported pi heads with stainless oversized valves , full bolt ons with longtubes and a plate kit with 175 jets in it... should be dyno tuned next week the goal is 500whp