94Pro-5.0
Well-Known Member
I had a build thread for the car in the past but all of the picture links are broken and it has not been updated in years...so I'm starting a new one. This project is slow going but I am finally starting to make some progress so I figured I'd start another build thread.
After 2-3 years of the car sitting outside of my dads shop, I was finally able to get the car to my house and start messing with it here and there
With a full time job, 2 kids, and my other 69 Mach 1 project, there isn't much free time left to work on the car
I did most of the wire tuck years ago. I'm currently shaving the engine bay with Scott Rod panels, fabbing custom hard stainless brake lines and -AN air conditioning lines.
I relocated the fuse box to the inner fender area. I flipped it upside down for easy access to the fuses from underneath
Most of the holes on the radiator support and shock towers have been welded
More wire tucking
After 2-3 years of the car sitting outside of my dads shop, I was finally able to get the car to my house and start messing with it here and there
With a full time job, 2 kids, and my other 69 Mach 1 project, there isn't much free time left to work on the car
I did most of the wire tuck years ago. I'm currently shaving the engine bay with Scott Rod panels, fabbing custom hard stainless brake lines and -AN air conditioning lines.
I relocated the fuse box to the inner fender area. I flipped it upside down for easy access to the fuses from underneath
Most of the holes on the radiator support and shock towers have been welded
More wire tucking