New here, I have a 98 GT that I have had since I was in high school. It is more or less stock has exhaust, CAI, and 3.73’s otherwise not much has been done to it besides that. It has sat in the driveway for about 3 years and when I parked it lots of things were starting to fail and not being used for that long didn’t help. So I have finally decided to fix her up. I’m not looking to build the engine past tuning it up at the moment just wanting to make it a smooth riding cruiser. So to begin my rebuild I have started with the suspension.
I am trying to replace/repair everything I can within reason. So I replaced the shocks, got new lowering springs, new ball joints, control arm bushings, caster camber plates, etc. I also powder coated my control arm and steering knuckle. Here’s a picture of where I am sitting currently I am waiting on some brake parts then will start tearing into the drivers side to do the same.
I am trying to replace/repair everything I can within reason. So I replaced the shocks, got new lowering springs, new ball joints, control arm bushings, caster camber plates, etc. I also powder coated my control arm and steering knuckle. Here’s a picture of where I am sitting currently I am waiting on some brake parts then will start tearing into the drivers side to do the same.