Bored as Hell, I need a Sunday Project

[Mustang_Sally]

Title says it all, it's friggin cold outside so preferably something I can take inside with me. I pulled the gauges yesterday, detailed them and put them back in, took about an hour. I'm looking for a similar project, something that won't have me running to an auto parts store, which is 30 miles away, one way.

Suggestion would be appreciated.

Thanks fellas,

Mustang Sally

 

[MustangChris]

paint your guage needles.

guage LED swap

gas pedal mod

shorten factory antenna

 

[Tony]

pop your alt. off. get some scotch brite..some steel wool, and some metal polish. make it look awesome and throw it back on.

pop your plenum off..do the same thing.

 

[Orange 94]

Polish something!

 

[sn95 bullitt]

gas pedal mod

Please do elaborate.

 

[MustangChris]

you shorten your throttle cable to bring the gas pedal to the same height as your brake pedal

 

[Ferocious]

pop your alt. off. get some scotch brite..some steel wool, and some metal polish. make it look awesome and throw it back on.
pop your plenum off..do the same thing.

Definitely doing this when I have some free time.

 

[John Nich]

My sunday funday project was to replace all the hoses in my car..In a foot of snow. Last week I blew an Upper radiator hose, and yesterday I blew the "heater hose assembly thingy". It's the metal pipe right ontop passenger side valve cover that connects into the heater core. A friggin' metal pipe with a crimped on hose... made of unobtainium....bracket bolted to the exhaust studs.. what a pain in the ass. Autozone didn't have it, couldn't find the part number on fords website. So I had to ghetto-engineer an alternative. Works great. Then did the Upper, Lower....friggin' piece of Dayco shit needed trimming, There's only one tiny hose that i didn't replace... and with my luck that thing will blow next week and turn my car into a rolling pile of steaming shit.

 

[g36 monkey]

My sunday funday project was to replace all the hoses in my car..In a foot of snow. Last week I blew an Upper radiator hose, and yesterday I blew the "heater hose assembly thingy". It's the metal pipe right ontop passenger side valve cover that connects into the heater core. A friggin' metal pipe with a crimped on hose... made of unobtainium....bracket bolted to the exhaust studs.. what a pain in the ass. Autozone didn't have it, couldn't find the part number on fords website. So I had to ghetto-engineer an alternative. Works great. Then did the Upper, Lower....friggin' piece of Dayco shit needed trimming, There's only one tiny hose that i didn't replace... and with my luck that thing will blow next week and turn my car into a rolling pile of steaming shit.

And how does that make you feel?

 

[John Nich]

And how does that make you feel?

Made me feel damn good! Savin' money and breakin' EPA Laws.