LOL----- Im an expert on this. Ive done it too many times. You will need:
(8) NGK TR55 plugs
7mm socket
3" 3/8 extension
6" 3/8 extension
3/8 rachet
5/8 sprark plug socket
*A lot of patience
*knee pads
*beer
*Whiskey of choice
It is no fun, but easy. Make SURE after you remove the coil packs, blow out each hole with compressed air, otherwise dirt will fall in each cylinder. use anti-seize because these are aluminum heads. Be careful not to cross-thread. these heads have been known to blow the spark plug out of the head.
PM me with any questions.