Hey guys! How's it going? I recently got my hands on a product from dasai, the mochi! It's a little screen with a face that cycles through animations. I'd like to retain a stock appearance on the interior so, I'm going to remove my old dash clock (broken) and put the mochi lcd in place of the clock screen. The mochi is powered through USB type C and I would like to re wire it to the dash clock wires if possible. Does anyone know if the power that the dash clock is receiving would be enough to power the mochi instead. How would I check to ensure I'm not going to short anything? Thanks, you guys have been an endless source of help. <3
Dash clock conversion
- Thread starter dubsos
- Start date
badass98svt
Well-Known Member
- Joined
- Jan 11, 2006
- Messages
- 4,170
- Reaction score
- 1,871
I have no idea what a 'mochi" is.
Check out the dasai Instagram page and you'll understand
badass98svt
Well-Known Member
- Joined
- Jan 11, 2006
- Messages
- 4,170
- Reaction score
- 1,871
No Instagram here, no social media.
If I wanted help with something, I'd explain it though.
Should be fine. The dash clock gets 12VDC and you could simply wire it into that.
or
You can buy a USB outlet, wire into the clock circuitry and then plug the mochi into that.
Good luck and take pictures!
or
You can buy a USB outlet, wire into the clock circuitry and then plug the mochi into that.
Good luck and take pictures!
Thanks! This is what I was looking for, I did a test fit and it's surprisingly perfect. I will post results soon!
MyLittlePony
Active Member
Any updates? I’m honestly interested in this product. Would be nice if they spoke other languages though.
Similar threads
