Dead spot in gauges

[Late4Work]

I dunno why this is the way it is, put my gauges in and took a pic..... Anyone else have this problem????

 

[Antcjr]

Pull everything back out. The bulb in the middle is either out or not installed properly. Are those the white face gauges from brothersperformance?

 

[sn95 bullitt]

Like he said. There's like four bulbs under black caps i believe. Ones out

 

[CC'S95GT]

there's 5 and he has 2 out. oil pressure is out too.
you should replace all of them. if you don't, in a month another one will go out.

 

[lutter94]

Might as well just put some LED's in there....

 

[Late4Work]

LEDs r in there, and I could have sworn I fixed it, ughhhh I'll try it again

 

[Late4Work]

And as far as the gauges, they came with the cobra when I bought it

 

[ttocs]

pull the bulb out, spin it 180 degrees and push it back in. Leds are polarized meaning they have to be put in a certain way unlike the standard halogen bulbs.

 

[Late4Work]

Roger, I'll try it

 

[Redford]

I have this problem for the top of my speedometer and tachometer, but not nearly as pronounced... it's just dimmer than the rest of it. I use halogens because my LEDs burned out & didn't give light as well. Looks like you just need to replace them.

 

[MustangChris]

dang. what a pain to fix. lol. have to pull all that out again. ug..... test it before you fully re-assemble it. lol.

 

[Late4Work]

I did, and the odd part is, when I fixed those two, one of the ones on the left went bad, so I had to spin it, but the gauges r fixed and lookin good