door panel help

[mygreengt]

Ok so i changed my door speaker. The door panel came off fine, but it was a pita getting it back on. But its still not perfect, the top of the panel pops off so there is like an inch between it and the window. Any help would be appriciated.

 

[joekd]

Make sure all the "hooks" that hold the door panel on line up

 

[ttocs]

it is a little tricky but as you push the door down you also need to push it back towards the door. The channel on top should just slide into place. IF it is not going down far enough take it back off and make sure the one-touch relay is not getting in the way or that there is nothing else preventing it from going back flush.