Drag suspension

[WarMachine762]

http://www.latemodelrestoration.com/item/LRS-5310E-K

I was thinking about ordering this. I'm gonna get some LCA's too. probably MM's. I'm gonna get slicks or DR's before next season starts too, then when I break an axle Ill upgrade to 31 spline axles.

 

[WarMachine762]

http://www.summitracing.com/parts/LAK-20150/?image=large

These are the control arms i was lookin at. Just lookin for opinions and advice.

 

[GTStang98]

looks good, when you upgrade your axles, go with the moser 31 splines. your going to have to get a different differential as well, so if you want to change your gearing then would be a good time.

 

[Depaja]

http://www.summitracing.com/parts/LAK-20150/?image=large

These are the control arms i was lookin at. Just lookin for opinions and advice.

Spend the extra cash and get these.....

http://www.uprproducts.com/mustang-chrome-moly-rear-control-arm-suspension-kit.html

 

[SVTurbo 98]

I would give dave at team z a call....he will lead you in the right direction and his parts and customer service is second to none.

 

[duff daddy]

Hpm Lower control arms, They are now being sold by Ford Racing, and are gold in color they are double adjustable and i cut my 60fts from 1.8 to 1.62.... ok enough said
springs up front go buy some used 4 cyl fox springs
shocks struts, run some 5 way tokico's or 10 way strangs, you cant go wrong. and rear springs justg either keep them stock or get another pair and cut them a coil.

 

[modo]

autoweld superstang 8.8 is probably the best hooking setup out there. i have seen cars drag the bumper on the street in sub 30 degree weather with them


.02


http://autoweldchassis.com/vbi.ivnu