header question

venom97 · Jul 5, 2008

ive done a search but found nothing specifically dealing with equal length shorties. ive got a brand new set of equal length shorties for a fox body i used to own. will those fit on my 94 with out hitting the strut towers and steering shaft? looking into bolting them on this month if so. thanks guys in advance!

El_Diablo · Jul 5, 2008

from what ive read/heard they will work but they dont have the correct emissions plumbing..... what brand?

venom97 · Jul 5, 2008

their mac,ive got a 331 going to go in it somtime so the egr stuff doesnt matter to much to me.

CC'S95GT · Jul 6, 2008

before you start you might want to brush up on colorful language. you can only screem the f word so many times before it's gets old.. driver side from the bottom. pass side from the top. good luck

fastgtfairlane · Jul 6, 2008

i have a set of bbk equal length shorties for a fox on my 94 gt and had no problems putting them on. expect about 3-4 hours from start to finish. i took the battery out and also unbolted the compressor to get to the very front bolt on the driverside header. you will have to take the bolt out of the motor mounts to get the passengerside in and bolt it up.

venom97 · Jul 12, 2008

DESERTCOX05 said:
before you start you might want to brush up on colorful language. you can only screem the f word so many times before it's gets old.. driver side from the bottom. pass side from the top. good luck

hahaha! thanks guys for the info. ill let you know how it goes! hahaha!

Bigdaddy · Jul 13, 2008

fastgtfairlane said:
i have a set of bbk equal length shorties for a fox on my 94 gt and had no problems putting them on. expect about 3-4 hours from start to finish. i took the battery out and also unbolted the compressor to get to the very front bolt on the driverside header. you will have to take the bolt out of the motor mounts to get the passengerside in and bolt it up.

Do you have a EGR delete? The set of stainless steel equal length Mac shorties I have do not have anything to bolt the EGR to :wall: