i need some advice

[96sn95gt]

ok my cars passenger header came loose! what do i need to do to put it back on? its a bbk shorty. i know i need to take off the h pipe, but what about the ac compressor?

 

[MustangMatt96GT]

drop the K member to tighten it up and use stage 8 locking header bolts....

 

[96sn95gt]

wow! hang here i dont have a lift :crying: just two ramps and a jack,any other way? :TY:

 

[9psi 98]

Try getting at them with an assortment of ratchets, wrenches, extentions, and swivels. I don't see why you would need to drop the K member, that is just so you can get them in there easier. Worst case scenario, undo one motor mount and jack the engine up from where the oil pan meets the block. That will give you more room.

 

[96sn95gt]

do i need to disconnect the ac compressor to lift the motor high enough to get to the header?

 

[9psi 98]

do i need to disconnect the ac compressor to lift the motor high enough to get to the header?

trial and error. Just do it, if something gets in the way remove it.