JoshHooten's 94 GT

JoshHooten · Mar 4, 2012

Mods list
[motor]-
--stock
[Intake]-
--93 cobra
--bbk throttle body
--cold air intake
[exhaust]-
--off road h-pipe
--flowmaster 40 series mufflers
[drivetrain]-
--auto to manual conversion stock t-5 trans
--steeda tri-ax shifter
[suspension]-
--front, ford c spring's 3/4 coil cut no iso's on the bottom stock iso's on top
--maximum motorsports caster camber plates
--rear,ford c springs dead coil +1/4 coil cut and no iso's
--cobra rear sway bar
[wheels and tires]-
--front 17x8 frpp bullitts with 245/45-17 nitto555's
--rear 17x10.5 american racing torq thrust m with 315/35-17 nitto 555's
[body]-
--hood 3.5 cobra rr hood
--mach 1 chin spoiler
--smoked headlights
--96-98 tail lights
--wingless

Well I have been on here for a while now ,I guess its time for a build thread and there will be a TON of pics on here so here we go.

I have had this 94 GT since 2003 it was completely stock when I got the car.
When I got the car it had stock 5 star 16in pony wheels but I don't have any pics of it like that.
here it is after I got the stock bullitt wheels.

Then next thing in line was the deep dish bullitt wheels before they were very popular.
I painted the stock hood black at that time also
The first set of 315 tires I bought lasted 2k miles they were bf goodrich g force drag radials 315/35-17

Now at this point the anthracite on the back wheels was lighter so I decided to paint them black so they would match
the front wheels are 17X8 stock frpp anthracite the rears are 17x10.5 american racing torq thrust M's
I also at this time had a saleen s281 spoiler and had to much black on the car along with a frpp chin spoiler

245 vs 315

JoshHooten · Mar 4, 2012

Next I went wingless and I forgot to mention the 96-98 tail lights

Ok at this point I have ford c springs on the car but it wasn't low enough so I cut 3/4 a coil in the front and dead coil +1/4 coil in the back w/o isos in the back
before

after
and it has settled some since then

Rear tire gap

Front tire gap

I also had to roll the rear fenders so the 315's wouldn't get cut into

miss2slocoupe · Mar 4, 2012

looks great josh! i didnt know you had that car that long, its gonna be so pretty by the time your done

and it already is pretty

JoshHooten · Mar 4, 2012

Thanks alot Kaitlyn Still got a few more pics and info to come

JoshHooten · Mar 4, 2012

Ok a few of the exhaust and motor now The motor is completely stock except for 93 cobra intake,bbk throttle body and cold air intake.
Exhaust consist of offroad H pipe and flowmaster 40 series
Keep in mind the motor needs to be cleaned

I had an issue with the timing chain cover leaking a few months back and had to replace the gasket , long story short bolt broke off in the block and
had to cut the timing chain cover to get to the bolt

New timing chain cover and water pump

This is how close the exhaust now sits to the ground ,This is a stock size stereo that came out of this car

The interior is pretty much stock also

JoshHooten · Mar 4, 2012

Ok and how the car sits right now I also forgot to mention it was originally an auto but last year was swapped to a t-5 and was the best money I
have ever spent on the car

My emblem

miss2slocoupe · Mar 4, 2012

omg please fix your tailpipes

JoshHooten · Mar 4, 2012

miss2slocoupe said:
omg please fix your tailpipes

I Know I want new ones I just need some that will fit between the 315's and the gas tank without rubbing

miss2slocoupe · Mar 4, 2012

JoshHooten said:
I Know I want new ones I just need some that will fit between the 315's and the gas tank without rubbing

oh yeah forgot you had that problem

JoshHooten · Mar 4, 2012

miss2slocoupe said:
oh yeah forgot you had that problem

Yeah im kinda limited I think im just gonna go with some dumps and just put some tailpipes on for the emissions and take em back off but IDK

miss2slocoupe · Mar 4, 2012

ewwww dumps...

JoshHooten · Mar 4, 2012

miss2slocoupe said:
ewwww dumps...

You mean you don't like dumps ,I would absolutely love some tail pipes like yours but I just don't want to but them and have them not fit
but I guess I could have them custom fit I mean after all my friends dad owns a performance shop ,What a dumbass I am for not thinking of that oh well

Slykin · Mar 4, 2012

I really love your stance.. that's what i'm shootin for. Car looks really tough.

JoshHooten · Mar 4, 2012

Slykin said:
I really love your stance.. that's what i'm shootin for. Car looks really tough.

Thanks it took me so many tries to get it exactly how I wanted it I think I took out and put the springs back in at least 4 times
right now as it sits it has ford c springs all around with the front m&m caster camber plates stock style struts 3/4 coil cut from the bottom of the front
springs with both iso's and the Rear has top of the spring cut full dead coil +1/4 coil with out top and bottom Iso's with a full tank of gas just for the
next 1/4 in