So I picked up a pretty clean 90 LX w/ some slight mechanical issues.
I've mostly been picking up parts and cleaning things up.
So far I've got 4.10's, compucam 2031, 1.7 cobra rockers, GMS k-member, a arms, coil overs, 7qt canton pan, Corbeau Forza, summit uppers and lowers, tyhoon intake, 65mm TB, long tubes and an extra short block.
The plan is to see if I can put this car in the 11's and keep the AC. If it won't do it on motor i'll just pill it til i kill it.
The short block is at the machine shop being freshened up, the trans is a recent rebuild and i'm trying to decide on what stall to get, probably in the 3000-3600 range. I still need to pick up some heads, I had some GT40Ps but decided I wanted to go bigger.
All of this is going to be done w/ a stock appearing car from the outside, no big and littles, no huge cowl, etc.
I'm not exactly happy w/ the quality of the typhoon intake but w/ about 2 hrs of grinding/polishing I've cleaned up the runners. The aluminum is very soft and it has a few holes that are trying to strip or are stripped(bought it used) so I've being good friends w/ a tap and some helicoils.
I've mostly been picking up parts and cleaning things up.
So far I've got 4.10's, compucam 2031, 1.7 cobra rockers, GMS k-member, a arms, coil overs, 7qt canton pan, Corbeau Forza, summit uppers and lowers, tyhoon intake, 65mm TB, long tubes and an extra short block.
The plan is to see if I can put this car in the 11's and keep the AC. If it won't do it on motor i'll just pill it til i kill it.
The short block is at the machine shop being freshened up, the trans is a recent rebuild and i'm trying to decide on what stall to get, probably in the 3000-3600 range. I still need to pick up some heads, I had some GT40Ps but decided I wanted to go bigger.
All of this is going to be done w/ a stock appearing car from the outside, no big and littles, no huge cowl, etc.
I'm not exactly happy w/ the quality of the typhoon intake but w/ about 2 hrs of grinding/polishing I've cleaned up the runners. The aluminum is very soft and it has a few holes that are trying to strip or are stripped(bought it used) so I've being good friends w/ a tap and some helicoils.