More toys

[94 DropTop]

Well I have finally collected enough crap to start putting it on the stang. All so to the collection have have new strut mounts, brake rotors, Diff. bushings, and a Spintech Side exhaust. Those are Steeda Drag springs, the rears are already in.

 

[Stopsign32v]

I'm guessing 13.4@109mph. If you run slicks and leave on the button..........12.7@111mph.

 

[94 DropTop]

my last attempt was a 15.2. But since then ive added 4.10's the shift kit that just went in last night. and now I have all of this.

 

[Stopsign32v]

Ouch....good luck! I was there once, the nitrous will hold you over until you get some real heads and all on it. Then you will have to worry about that stinking block! :welcome:

 

[94 DropTop]

I dont really plan on touching the motor for awhile. I still have a stall, subframes, up to a 125 shot. I want to see what this 5.0 can do, and what it can handle.

 

[Win]

Which LCA's are those ??

 

[94 DropTop]

they are ford racing uppers. I have aftermarket ones and I believe they are making the rear end bind, so these are going in.

 

[Passenger]

Those uppers are the exact same as your stock ones I'm pretty sure.

FWIW, my car ran 13.12@105 on a 150 dry shot. Mods are in my sig. It was still on a T5 at that time.

 

[94 DropTop]

they are. i trashed my stock ones plus im sure they needed new bushings by now.

 

[Passenger]

I feel ya there. Mine are pretty worn out now too.

 

[Ciotti]

Those are the FRPP uppers which have much stiffer rubber bushings than what came in our old ass cars :dancing6:

 

[94 DropTop]

They are stiffer for the fox bodies. i believe they are stock bushings for our cars

 

[OnyxCobra]

They are stiffer for the fox bodies. i believe they are stock bushings for our cars

I believe that is correct. they're supposed to be the best option for UCAs on our cars. Parts look good :thumb:

 

[97vertstang]

cool parts

 

[94 DropTop]

cant wait till i can spray this bitch

 

[94darkhorse]

Nice collection of stuff.