Motor mounts

[franklinstein]

I have a 95 gt SN95 with some new vibrations due to a bad motor mount. Does anybody know the best procedure for changing motor mounts? Will pulling out the entire motor be necessary to replace the motor mounts?

 

[ivan12]

It's not that complicated, you don't need to pull the motor. Lift the car on jackstands, unbolt the mounts and lift the engine with a jack and a 4X4 on the oil pan. Or you could probably use a cherry picker to lift it enough to swap them out

 

[det_riot]

It's not that complicated, you don't need to pull the motor. Lift the car on jackstands, unbolt the mounts and lift the engine with a jack and a 4X4 on the oil pan. Or you could probably use a cherry picker to lift it enough to swap them out

Lifting the engine by the jack on the oil pan is a risk to bend the pan no-matter what is used on the jack (4x4, etc). Save yourself the risk and piece of mind and borrow an engine jack from a buddy or use the rafters of your garage.