Alright guys, I just traded my 97 Cobra Convert for a 96 Procharged Cobra. Just thought Id put up some quick pictures I got of the car to see what you guys think of it. Here is a list of mods done to the car. It makes 487 horsepower to the rear wheels.
Stroked 4.6 (289ci to 300ci) 3.75 stroke
Fully machined 03/04 iron block
Killians ported heads (combustion chamber and exhaust ports to match header opening
Probe SRS street kit (forged crankshaft, srs forged pistons, race pins, forged rods, cl77 bearings)
Ford Gt supercar cams
Irmc delete
Procharger D1SC supercharger with modified impeller and intercooler
MSD coil packs
MSD plug wires
BBK twin 62 mm throttle body
60 lb. injectors
sct 90 mm mass air
EGR block off plate
Custom headers and 3 inch x pipe into Flowmasters
Wideband Air/Fuel gage
Boost gauge
Fuel Pressure gauge
BBK 255 lb. fuel pump
Aeromotive fuel pressure regulator
Flaming river manual rack and pinion and steering shaft
Tubular K-member
Coil overs in front
Steel caster camber plates
Bump steer kit
Solid motor mounts
Lakewood 70/30 front struts
Lakewood 50/50 rear shocks
Rear tubular upper and lower control arms
Spec stage 3+ clutch, aluminum pressure plate and aluminum flywheel
BBK clutch quadrant cable
Ford racing aluminum driveshaft
373 gears
Sorry for the awful pictures, I am hoping to get some better ones this week with my friend. Just wanted to get your opinions on the car. Also sorry for the long post.







Stroked 4.6 (289ci to 300ci) 3.75 stroke
Fully machined 03/04 iron block
Killians ported heads (combustion chamber and exhaust ports to match header opening
Probe SRS street kit (forged crankshaft, srs forged pistons, race pins, forged rods, cl77 bearings)
Ford Gt supercar cams
Irmc delete
Procharger D1SC supercharger with modified impeller and intercooler
MSD coil packs
MSD plug wires
BBK twin 62 mm throttle body
60 lb. injectors
sct 90 mm mass air
EGR block off plate
Custom headers and 3 inch x pipe into Flowmasters
Wideband Air/Fuel gage
Boost gauge
Fuel Pressure gauge
BBK 255 lb. fuel pump
Aeromotive fuel pressure regulator
Flaming river manual rack and pinion and steering shaft
Tubular K-member
Coil overs in front
Steel caster camber plates
Bump steer kit
Solid motor mounts
Lakewood 70/30 front struts
Lakewood 50/50 rear shocks
Rear tubular upper and lower control arms
Spec stage 3+ clutch, aluminum pressure plate and aluminum flywheel
BBK clutch quadrant cable
Ford racing aluminum driveshaft
373 gears
Sorry for the awful pictures, I am hoping to get some better ones this week with my friend. Just wanted to get your opinions on the car. Also sorry for the long post.






