Does anyone have a set of solid lifters laying around that they do not need or ones that I can borrow? I need to check the PVC with my new heads and my current lifters are hydraulic so I need a set of solid lifters just to make sure the PVC is correct.
Need a set of solid lifters.
- Thread starter Venom351R
- Start date
Addermk2
Well-Known Member
- Joined
- Mar 7, 2006
- Messages
- 2,534
- Reaction score
- 56
you can convert a stock hydraulic to solid
OR, you can get a low tension "checking spring" and replace your valve springs on one cylinder with it. Thats actually what I HAD to do, because i could not remove my link bar lifters to use a solid. Infact, I would strongly recommend using the spring method since it uses the actual parts that will be used in your engine (minus the springs, which dont affect PTV)
OR, you can get a low tension "checking spring" and replace your valve springs on one cylinder with it. Thats actually what I HAD to do, because i could not remove my link bar lifters to use a solid. Infact, I would strongly recommend using the spring method since it uses the actual parts that will be used in your engine (minus the springs, which dont affect PTV)
Addermk2
Well-Known Member
- Joined
- Mar 7, 2006
- Messages
- 2,534
- Reaction score
- 56
