hey guys, so i lowered my stang with some h&r super sport lowering springs. well i have had a rubbing noise so i got it up on the jackstands and got under it. well my drive shaft is rubbing on my e-brake mount and my e-brake lines. is there anything out there that will relocate it or something i can do???? please help, its rubbing through pretty good so i gotta get it done quick cuz she is my daily driver.
need help with lowered stang
- Thread starter project94
- Start date
GDTrumbo
Well-Known Member
You might check to see if some of the cables' slack can be adjusted out of it. Common problem. If you lower a '94 - '98 more than 1.25" or so, you are potentially asking for trouble in this area. DS tunnel was deepened slightly for '99+ cars.
GT
GT
CompOrangeSN95
Well-Known Member
the person that had my car before me had the same problem, I didn't feel like dealing with it so I took the e-brake and cables out haha luckily my car is track online and I really have no use for an e-brake, the only other thing I can think to do is to pull your d-shaft and grind down your e-brake bracket...
Similar threads
