castine917
Well-Known Member
was the other one a vert also?
New heads
- Thread starter Mrstangerbanger
- Start date
OP
OP
Mrstangerbanger
Well-Known Member
Just picked them up yesterday ....
The build begins ...
I got the Brand new fully ported heads with rockers for only $850
The build begins ...
I got the Brand new fully ported heads with rockers for only $850
Addermk2
Well-Known Member
- Joined
- Mar 7, 2006
- Messages
- 2,534
- Reaction score
- 56
ooh look.. paperweights!
j/k Who did the port work?
j/k Who did the port work?
OnyxCobra
Post Whore
nice choices man, TFS is nice stuff. Are you planning on a dynotune after the head/cam swap?
OP
OP
Mrstangerbanger
Well-Known Member
14.2 @96mph with drag radials
The heads are ported all to hell and look perfect so after calling trickflow they are telling me to use a pushrod lenght checker because the 6.7 pushrods wont work with stock cam ....
I'm thinking of just getting a trickflow stage 1 cam or steada 19 cam what do you guys think??
Ya there is a really good dyno shop in Sacramento CA or that im going to take the car after I'm done building it ....
Its around $500 for the session :tongue3:
The heads are ported all to hell and look perfect so after calling trickflow they are telling me to use a pushrod lenght checker because the 6.7 pushrods wont work with stock cam ....
I'm thinking of just getting a trickflow stage 1 cam or steada 19 cam what do you guys think??
Ya there is a really good dyno shop in Sacramento CA or that im going to take the car after I'm done building it ....
Its around $500 for the session :tongue3:
OnyxCobra
Post Whore
I have a Steeda #19 cam but if i had TFS heads and intake I'd probably go with one of their cams as well...
I don't think you'll get low 13s high 12s easy, but it should be within reach if you can drive it.
I don't think you'll get low 13s high 12s easy, but it should be within reach if you can drive it.
OP
OP
Mrstangerbanger
Well-Known Member
Ya you really don't realize how much of a gutless big these sn95 mustangs are but ya I was thinking high 12's low 13's after the car is fully tuned with weld drag lites ...
not saying it isnt possible, but thats going to be hard in a much heavier car that is going to not be as stiff coming off the line.
not saying.....just saying.....
not saying.....just saying.....
OP
OP
Mrstangerbanger
Well-Known Member
evilcw311 said:
How much more does a Convertible weigh then a hard top??
I will have full body sub frams that are custom made by M&M performance in Sac so the body will be stiff but I really can do anything about the weight shit lol lol lol
Anyway the car is going to be so much better and I cant wait..
the setup will definatetly be better, but if i remember right there is a few hundred pounds of difference. someone correct me if im wrong on the weight diff. please!!
on average figure an extra tenth of a second for every extra hundred pounds of additional weight. its the same reason that a notchback lx 5.0 was always faster than a gt in the ol'fox's. it was like a 400lb difference, again correct me if im wrong. trying to remeber stats after putting in 12.5 hours on a home security system will fry your brain worse than drugs!!!! lol
on average figure an extra tenth of a second for every extra hundred pounds of additional weight. its the same reason that a notchback lx 5.0 was always faster than a gt in the ol'fox's. it was like a 400lb difference, again correct me if im wrong. trying to remeber stats after putting in 12.5 hours on a home security system will fry your brain worse than drugs!!!! lol
Addermk2
Well-Known Member
- Joined
- Mar 7, 2006
- Messages
- 2,534
- Reaction score
- 56
Verts have been seen to be in the 3600# area, where even the Cobra coupe was only curbed at 3365#. A low option GT (GTS) will be closer to 3200#
OP
OP
Mrstangerbanger
Well-Known Member
Ya I agree 100% its really a heavy big...
Where is the 14.6@96MPH coming from? I was asking about the 12 second run with the fox that has just heads and 3.73's. You said it was a 12 second mustang I just wanted to hear some more details about the run, the mph 60' time and any suspension work done at all?
OnyxCobra
Post Whore
no way Fox GTs were 400lbs heavier than the LX
castine917
Well-Known Member
1990-1993 conv.-2996, 2door coupe-2775, 2door hatch-2834
info came from consumers guide at this page http://consumerguideauto.howstuffworks.com/1990-to-1993-ford-mustang-8.htm
info came from consumers guide at this page http://consumerguideauto.howstuffworks.com/1990-to-1993-ford-mustang-8.htm
OP
OP
Mrstangerbanger
Well-Known Member
The Lx foxbody ran a 12.9 at 110 mph with a 1.8 60 foot
The car had Huge ported gt40x heads with Ford E303 cam stock intake , T Body,Mass air.3:73 gears .19lb injectors, short throw shifter, Under drive pulleys. Upper and lower control arms.coil,rebuilt trans with shorter first gear,aluminum drive shaft, x pipe no cats . and some more little shit ..
I smoked smoked the shit out of my good friend with his build 90 GT with a powerdyne lol lol ... :headbang:
The car had Huge ported gt40x heads with Ford E303 cam stock intake , T Body,Mass air.3:73 gears .19lb injectors, short throw shifter, Under drive pulleys. Upper and lower control arms.coil,rebuilt trans with shorter first gear,aluminum drive shaft, x pipe no cats . and some more little shit ..
I smoked smoked the shit out of my good friend with his build 90 GT with a powerdyne lol lol ... :headbang:
ttocs
Forum's #1 poster
19 lbs injectos wow.
19lb injectors............arent those standard??? lol
