97stanger
Legend
- Joined
- Mar 22, 2006
- Messages
- 5,880
- Reaction score
- 100
Well, last time around I was having ptv contact on my CMS stage 3 blower cams, so I had to swap the cams out. Swapped the cams for custom grind bullet racing cams, had my cams line bored, and started putting everything back together. Here is how she sits now. Should be all degreed/timed come early next week, then I'll start setting up the 8 rib pulley setup...other than that just little stuff and then the motor should be good to go in the car: