smog delete question

[coupe5ohh]

i was going to remove my smog pump and all the other smog related bs under the hood to try and help clean up the engine bay a lil bit since im going longtubes but i have a couple questions..wat holes need to b plugged bsides the ones on the back of the heads and wat do i fill the holes with espically the ones in the back of the heads..thx in advanced

 

[beuchaw94gt]

http://sn95forums.com/index.php?topic=8103.0

 

[coupe5ohh]

questions answerd

 

[CC'S95GT]

oh no, are we going to go down that road again?

 

[Addermk2]

Question NOT answered.... the link given in that thread for the size of the bolts to plug the heads.. is wrong.

the holes are 5/8-11...

 

[CC'S95GT]

see here we go

 

[coupe5ohh]

see here we go

lol

 

[coupe5ohh]

Question NOT answered.... the link given in that thread for the size of the bolts to plug the heads.. is wrong.

the holes are 5/8-11...

so what exact bolts do i need to plug the holes on the back of the heads? cause thats the most importnat part so i needa no so i can go and buy the parts so i can get this done

 

[Newman]

just buy 2 of everything! I need to know as well too. ccasion14:

 

[rz5.0]

Question NOT answered.... the link given in that thread for the size of the bolts to plug the heads.. is wrong.

the holes are 5/8-11...

he just told you see^^^^. they also sell the actual plugs.
http://www.store.partsdinosaur.com/product1521.html
what i would get

 

[Addermk2]

Trickflow sells Thermactor Plugs. They are about $12 each IIRC.

OR you can buy 5/8"-11 bolts at your local hardware store, cut them down to 1" in length, clean all the carbon crap out of the threads... and screw them in.

 

[rz5.0]

these are 2 dollars each.

 

[coupe5ohh]

Question NOT answered.... the link given in that thread for the size of the bolts to plug the heads.. is wrong.

the holes are 5/8-11...

he just told you see^^^^. they also sell the actual plugs.
http://www.store.partsdinosaur.com/product1521.html
what i would get

And those will go right in? Those would be perfect

 

[rz5.0]

yes

 

[coupe5ohh]

ok i juss orderd the last 2

 

[Addermk2]

http://www.store.partsdinosaur.com/product1521.html

Awesome, im bookmarking this link.

I still prefer the bolts... if the engine is in the car, they are just easier to put in.

 

[flyboygeo]

I used 2 9/16" x 1" NC GR5 bolts and trimmed the length down so they fit perfectly. Used some blue loc-tite too.

 

[Addermk2]

I'm glad you fit a small bolt in a large hole.

Its still wrong

 

[coupe5ohh]

http://www.store.partsdinosaur.com/product1521.html

Awesome, im bookmarking this ]

thats the only reason y i orderd those cause the motor will b outta the car

 

[castine917]

napa also had the thermactor plugs for less than $2.