Separate names with a comma.
Discussion in 'The Garage' started by Sinned83, Apr 13, 2014.
I plan to lower the mach1.
I've got a box in my spare bedroom of springs, control arms and hope to find shocks/struts and cc plates soon also so a nearly complete suspension overhaul is in my future! Then window tint for the aquarium!
only 1?! what fun is that.
1 drivers side fender flare
2 finish pass side flare
3 smooth in brake vents
4 finish running wires in engine bay
5 finish mockup in engine bay
6 pull motor
7 fill holes/smooth/paint
8 prep car for paint
Lol I kno you have a lot going on Scott.
I'm dropping mine off next tuesday at the body shop. Having my cobra front bumper put on and two toning the pillars/roof black
Well, its not really a mod, but Im dropping the car off at the dyno shop this coming weekend to have it tuned for all of the previous mods that were done this past winter. Then, I just plan on driving it and saving up for a new set of slicks and hopefully racing it a little bit this summer...
Im going to participate more on this forum. I just got drilled and slotted rotors and Steeda X2 ball joints and bump steer kit. in the mail I have coming maximum motorsport C/C plates and steering shaft. The bump steer kit is on back order so when I get that I'll get everything installed. then I'll be getting MM lower rear control arms.
Stick of dynamite and a cliff.
Hopefully long tubes but i don't know, I've been debating this for a year now.
I do need to weld my SFCs in.
well my car is currently getting an exhaust leak fixed so I can finish tuning my turbo for this years racing season.... but I have a set of XXRs arriving to my house on Wednesday to go on the car when its ready
and then a sh!t ton long list afterwards in the next month lol
Holley intake, tune, and nitrous!
SFC's and a tune for 91 (going back to Cali soon)
if money and time are there get my snow performance installed and tuned for.
Either DD 03/04 cobra reps in a custom finish or a cobra R hood. Depends which I can find for a better deal.
Crapatalkin' on the iPhone 5.0
Maybe new wheels or T5 swap.
Oem R hood?
hope those calipers worked out great for ya.
Yours should be amber fogs. They are scheduled for pickup tomorrow
yours should be my wheels. Just saying
OEM Cobra hood and cobra bumper being dropped off at paint and hoping to coax a friend to install them for me
polishing the IRS catback
hopefully new and unique wheels if mine sell
I'd like to get my brakes done before the fogs but we'll see. I have just about enough money to pick up some pads, wheel studs, and ball joints so I can get my buddy over and put your front calipers and new pads in, yank the rear calipers and paint those then install those pads and do the studs and ball joints while we're in there.
I am going to fully restore those fog lenses before even mocking them up onto my car. Lol.
Thanks again btw
Crapatalkin' on the iPhone 5.0
ive gotta re plasti dip one of my wheels and gotta get someone to help me cut the mofo springs cause that four wheel drive stance just aint gonna cut it!!
Doesn't matter. Whatever I find first. Just looking for a 2.5-3.5 cowl.
Actually get a mustang parked in my driveway...