Almost finish my rebuilt, need estimates HP/1/4 mile times with my setup.

[95blk5.0stang]

I am almost finish rebuilding of my 95 mustang gt. I just want to have a idea of my hp and 1/4 times might be with my setup.


SETUP:
Rebuilt 302 .30over Torque Plated bore
Rebuilt kit Hyper pistons
New Cast iron Crankshaft
AFR 165cc 58cc Stud mount
Proform 1.6 Roller rockers
Trick flow hardened push rods
E303 Cam
Explorer upper lower intake manifold lower polish up.
70mm Throttle body
BBK CAI
BBK Longtubes n Xpipe/with Mac prochamer catback
King cobra clutch kit
FRRP 3:55 gears
Superior Hardened 28spline axles
bumped timing 13* 93octane
Nitto Drag radials
short throw shifter
A/C-Smog pump deleted w/ backseated n trunk panels

suspension:
Maxspeed lowering spring
Aftermarket upper/lower control arms

Estimate weight with driver stock weight 3280lbs

 

[2slo95fiveoh]

is this setup going to be tuned? i would guess appox 280-290 hp, and 1/4 mile in the low 13s, high 12s depending on traction.

 

[Paul]

Race it and find out. Estimates are useless since lots of folks can't drive their car to the full potential of their combination.

 

[95blk5.0stang]

is this setup going to be tuned? i would guess appox 280-290 hp, and 1/4 mile in the low 13s, high 12s depending on traction.

\


don't know any good tuners in philadelphia for mustang's.

 

[97 king cobra]

is this setup going to be tuned? i would guess appox 280-290 hp, and 1/4 mile in the low 13s, high 12s depending on traction.

\


don't know any good tuners in philadelphia for mustang's.

well i would strongly reccomend you get it tuned, although there are a few people on here who might still disagree.

 

[ripper]

Talk to Uncle Matt. He knows a good tuner in your area.

 

[ripper]

I would scale that car. Your going to be surprised unless you did some serious weight reduction on the actual weight. The lightest I could get my car was 3550.

 

[LAFENATU]

don't know any good tuners in philadelphia for mustang's.

Craig Radovich

Radical Racing
687 Jackson Rd.
Atco, NJ 08004


Craig is a former NMRA Pro 5.0 drag racer. The only person I EVER let touch my car. He tunes stuff from a stock GT to a 1000+hp drag cars.

He uses a Dynojet 248 and Diablosport Software.

With a dyno tune you'll be somewhere in the vicinity of 300 RWHP. The cam is a little small for the heads but it is far better than stock.

 

[97 king cobra]

I would scale that car. Your going to be surprised unless you did some serious weight reduction on the actual weight. The lightest I could get my car was 3550.

what the hell?! our cars only weigh 3280 stock! unless you have a vert and even then that doesnt add 270 lbs. my car weighs 3020 w/ a/c, stereo, regular electronics. Only thing out is the heavy exhaust, rear seat, spare tire, and smog pump.

 

[punksable]

the only thing i would do is ditch anything that says PROFORM!! me and some of my friends have had problems with their rockers, good price but not worth it to me!