Really? I didnt special order them or anything..just picked up the kit and ordered through summit.Those are not the rotors that currently come with the wildwood kits
sent from the toilet or from my cubicle
Really? I didnt special order them or anything..just picked up the kit and ordered through summit.Those are not the rotors that currently come with the wildwood kits
You wont have a parking brake with a 4p caliper in the rear.
sent from the toilet or from my cubicle
Weird. Considering that info was taking from wilwood and their dealers. I guess you can blame them. You can offer some of your expert knowledge instead of throwing a fit.Yes you can have an internal parking brake with a 4 pot set up.
This thread is starting to become a cluster **** of bad info ....Im out
Yes you can have an internal parking brake with a 4 pot set up.
This thread is starting to become a cluster **** of bad info ....Im out
Oh btw, wilwood 4piston brakes can have a parking brake with the "interal shoe system". None of which is offered as a kit for our cars. And a quick search of wilwoods website shows that my kit is still offered with the same rotor..hmmmm...bad info....
sent from the toilet or from my cubicle
Oh btw, wilwood 4piston brakes can have a parking brake with the "interal shoe system". None of which is offered as a kit for our cars. And a quick search of wilwoods website shows that my kit is still offered with the same rotor..hmmmm...bad info....
sent from the toilet or from my cubicle
So your sayin if its not in a kit its not available? Brakes are brakes as long as you know what rear you have and what brake offset you have, you can buy stuff in pieces and put it together.
no wildwood does not sell a 4 pot "KIT": for a sn 8.8 but that doesn't mean you cant find what you need to make your own kit.
yes B mad Im sure you can still get that rotor that you have but it isn't made in a 14"
Yes well I "can" put almost anything into the car with enough work and duct tape but any links on to where info about this is? I know when I looked the combination of the small caliper and then the lack of the parking brake from what I saw didn't even allow them in the running at that point.
the baer 6 piston 14" that arrives tomorrow (YEA!) was less then that.
the baer 6 piston 14" that arrives tomorrow (YEA!) was less then that.
Which 6 piston kit are you getting?
The ones in the pic are what arrived today. 14" 6 piston pro up front and 13" SS4's in back and their master cylinder. the polishing will begin later tonight.
You dont have to upgrade the master cylinder for 96+ because we have hydroboost right?
they will be polished with red letters. :grin::shocked:
No need to get mad about it. There is a lot of bad info even on the manf sites that just might not have been updated since changes were made or someone figured out that it would fit on their own. I mean correct me if I am wrong but I thought you were the one that said Baer doesn't have a 14" rear SS4 brake set up until I pointed out that it is not listed on Baer's site but it is on carID and they were more then happy to set me up with the 14" rears when I called baer to order them? Educate not alienate my man you are a wealth of knowledge and we love when you share with us to know the truth.