List your RWHP here...

[96StangGT]

Seems low man. See my sig......

yeah my heads are non port and polished yours are stage three, thats a huge difference...

Stage 2's and I'm running an auto trans. It?s always hard to compare dyno numbers when so many factors come into play, the biggest one being the Dyno. Either way nice car!!

Oh yeah my bad stage 2's and thanks man i like my car just wish it had more power, you gotta nice carr too

 

[justinschmidt1]

Id be more concerned about track times...I mean, if you dyno 255 and run 13.0 than who cars...but im curious why you only ran 14.1 and trapped 98.

My bolt on auto NPI with pi intake and bolt ons ran 14.0 at 101-102 mph with 2.1 60 foots for example

 

[96StangGT]

i found a very interesting article on the whole p.i swap deal and the edelbrock intake but they used the intake for a carb...look...http://www.hotrod.com/techarticles/engine/hrdp_0804_ford_4_6_engine/edelbrock_victor_jr_intake_manifold.html

 

[96StangGT]

Id be more concerned about track times...I mean, if you dyno 255 and run 13.0 than who cars...but im curious why you only ran 14.1 and trapped 98.

My bolt on auto NPI with pi intake and bolt ons ran 14.0 at 101-102 mph with 2.1 60 foots for example

Yeah the problem is i dont run 13s lol and only trap out at 98mph thats horrible and i dunno why...

 

[96StangGT]

and i've even had other people race my car b/c i thought it could of been me but they came out with the same results still low 14s and trapped out at 97-98mph

 

[justinschmidt1]

Ya, ive seen that...you should go carb...lol

 

[Paul]

I run 13s and only trap 97 mph.

 

[Spd0lit]

Is there any restictions in your intake path? Gasket not opened all the way and obstrucking flow? Funny Paul i run 13s too and trap 104

 

[hottwheels04]

um u sure aftermarket cams are in there? ur power and 1/4 and trap's sound like a stock pi gt with bolt ons, u sure its not stock pi cams? if u had aftermarket cams u should deff be over that power and run deep in the 13's if not 12's,ur power and 1/4 times sounds like a stock 99+ pi gt or bolt on pi motor.

 

[Paul]

Funny Paul i run 13s too and trap 104

It's slow but it runs hard for what it is!! :headbang:

 

[justinschmidt1]

Funny Paul i run 13s too and trap 104

It's slow but it runs hard for what it is!! :headbang:

Driver mod and good 60 foots can do a lot for a car.


I have a friend with 360rwhp, 410s, exhaust in a 04 gt with a vortech that has run a best of 13.3@ 107 with a 2.0 60 foot on Nitto drags.

I mean, most bolt on n/a 99-04 GT's can pull about those times

 

[96StangGT]

um u sure aftermarket cams are in there? ur power and 1/4 and trap's sound like a stock pi gt with bolt ons, u sure its not stock pi cams? if u had aftermarket cams u should deff be over that power and run deep in the 13's if not 12's,ur power and 1/4 times sounds like a stock 99+ pi gt or bolt on pi motor.

Yeah i'm 100% sure i have cams, bought them from comp cams and installed them in my driveway lol...and you can tell the car has cams if u just listen to it...and yeah can't be the driver mod cuz i've had numerous people race my car and come down with same results...no gasket leakin or nothing i've checked all that already just dunno wut it could be, yes i agree my car should be much faster but it just isn't...with my mods i should be low 13s imo or high 12s ...

 

[96StangGT]

Heres a video of my car idle...shitty vidoe cuz its from my phone so the sound from my car breaks up speakers in my phone but u get the point u can hear it has a stage 2 cams




^idle and revving

Best vid i could find on my computer sorry that its so shitty but u get the point

 

[hottwheels04]

k just making sure cause the times and power is power of a bolt on only pi gt 2 valve motor numbers / times

 

[rcjustin]

marking a spot for my 1000RWHP run soon to come

 

[1996slowstang]

My stock 96 gt 5-speed 3.27 gears made 197hp 270tq ran a 14.4@95mph with a 2.2 60ft.I would say somthing is going on with your ride but I dont know for sure.

 

[justinschmidt1]

Dyno numbers dont mean shit...

an operator can manipulate the numbers.

Ive seen a dyno operator take a car with 265 hp to 290, then to 320 just by loading the dyno differantly.

 

[Hoseitdown]

hmmm never had mine dynoed.

 

[justinschmidt1]

me either.....Id rather take my car to the track then spend like 70 bucks on some dyno pulls

 

[Hoseitdown]

spend 20 at the track, or 100+ at the damn dyno.... hmmmm


sometimes around Wilmington, they have a place called national speed, and they have a dyno day, where they only charge 50 bucks for 3 pulls.