So my thoughts on the trufiber hood? It fits very nicely. It lined up the same way as the oem hood. At first the hood didnt want to close, but after adjusting the rubber stopper a little, i got it to close. However, i caution you, if you adjust the stopper to much, the hood will sit to low relative to the fender, and also hit your headlight housing. It look me awhile to adjust it perfectly, but i have it lined up with the fender, clearing the housing, and closes pretty good. Next thing that was wrong was i couldnt flip the passenger wiper arm, it will make changing blades a little harder to do now. It should not interfere with the function. Next thing is when the hood is lifted, you are limited to how far you can go up because of the crowl hits the wiper arms. It might be because of the blades i have but just a heads up. And also, because the hood cant be lifted up fully, the hood prop will not work whatsoever. See photos below.