throw out bearing *UPDATE*

[FullThrottleStangs]

Re: throw out bearing

WOAH that thing lookes like its the size of a basketball! damn lol. so what makes it squeek and make noises?

 

[Win]

Re: throw out bearing

WOAH that thing lookes like its the size of a basketball! damn lol. so what makes it squeek and make noises?

Ball bearings run dry

 

[FullThrottleStangs]

Re: throw out bearing

well then couldnt you just grease it? or is it just not that simple...

 

[Win]

Re: throw out bearing

well then couldnt you just grease it? or is it just not that simple...

Sealed not that easy

You ought to see the Needle Bearings in Pinon Bearing

 

[FullThrottleStangs]

Re: throw out bearing

lol i have no idea what those are but im guessing it gets confusing. haha laugh at the newb :tongue3:

 

[FullThrottleStangs]

Re: throw out bearing

I FOUND IT. this is the exact noise the mach makes when i stop. but only for a few seconds then it goes away. hope this helps.

YouTube
- Broadcast Yourself.

 

[uncltrvlnmatt]

Re: throw out bearing

Does that sound go away when you step on the clutch?

 

[FullThrottleStangs]

Re: throw out bearing

Does that sound go away when you step on the clutch?

nope. when i see a stop light i automatically push in the clutch and put her in neutral and just cruise and slow down to the stop light. then i put it back in first when i stop and i hold the clutch the whole time. as soon as i stop it will tick like it did in the video then after a few seconds it will go away. now it does it when im moving too. seems like the problem is progressing.

 

[Win]

Re: throw out bearing

HMMM

 

[uncltrvlnmatt]

Re: throw out bearing

Do you feel any feedback in the pedal? It only does it with the clutch depressed?

 

[FullThrottleStangs]

Re: throw out bearing

no, but when i had that run in with the viper i pushed the stang kinda hard and took it to around 5000 rpms and now the clutch petal has to be about 3/4 of the way out before it engages. it used to engage as soon as the clutch petal left the floor. and ive tried just to go to a stoplight without the clutch in and yes, the noise still occurs. and also when im going and i shift it will squeek when i push in the clutch to shift. it normally has to be around 2700-3000 rpms for it to do this.

 

[sn95gtvert]

Re: throw out bearing

i've never heard a clutch sound like that.

and i've had a throw out bearing explode before. (91 jetta)
i'd take that thing to a dealer or a well trusted shop.

also pulling the trans can be done in a weekend on jackstands but you will need some help reinstalling it. they can get pretty heavy when your on your back lifting it.

 

[FullThrottleStangs]

Re: throw out bearing

i've never heard a clutch sound like that.

and i've had a throw out bearing explode before. (91 jetta)
i'd take that thing to a dealer or a well trusted shop.

also pulling the trans can be done in a weekend on jackstands but you will need some help reinstalling it. they can get pretty heavy when your on your back lifting it.

lol yeah id need help. but i dunno its like my dad has an aphobia of taking it to the shop. i dunno what it is but hes seeing the mustang going to waste and hes doing absolutely nothing to help it. but on any note ive been making a grociery list and heres what ive got so far. tell me yes, no, opinions needed guys!

http://www.americanmuscle.com/ford-throwoutbearing-7904.html?Cart=Ford%20Racing%20Performance%20Throwout%20Bearing%20%2879-04%20V8%29%20%A0%7CSPEC%20Stage%203%20Clutch%20%28Mid%2001-04%20Mustang%20GT%2C%2099-04%20Cobra%2C%20and%2003-04%20Mach%201%29%20%A0%5E2%5E384.98

http://www.americanmuscle.com/spec-stage3-t3650-transmission.html?Cart=Ford%20Racing%20Performance%20Throwout%20Bearing%20%2879-04%20V8%29%20%A0%7CSPEC%20Stage%203%20Clutch%20%28Mid%2001-04%20Mustang%20GT%2C%2099-04%20Cobra%2C%20and%2003-04%20Mach%201%29%20%A0%5E2%5E384.98

 

[uncltrvlnmatt]

Re: throw out bearing

If your clutch is making that noise, replace it.

 

[uncltrvlnmatt]

Re: throw out bearing

Go to your local go fast parts store and order a king cobra clutch kit. It should come with a throwout bearing, pilot bearing, and alignment tool. It should cost you about $200.00 or so.

 

[FullThrottleStangs]

Re: throw out bearing

ohhhhh thats way better than the 400 both of those were. thanks!

 

[uncltrvlnmatt]

Re: throw out bearing

If you order that clutch kit you have linked you don't need the throwout bearing, it comes with it.

 

[uncltrvlnmatt]

Re: throw out bearing

I run a king cobra clutch in my 97 cobra and I have no problems with it. It will handle bolt ons no problem.

 

[FullThrottleStangs]

Re: throw out bearing

I run a king cobra clutch in my 97 cobra and I have no problems with it. It will handle bolt ons no problem.

dude i dont even have to worry about it being able to handle bolt ons for now lol

 

[FullThrottleStangs]

Re: throw out bearing

but thanks for the help guys... hopefully this will fix the problem so i cant stop making theses annoying threads lol