Hit a bit of a snag, I am going start working on replacing the fuel tank and such. I ordered a Deatschwerks 340lph pump a long time ago and recently ordered a new fuel pump assembly. Simply because for the $70 I figured it might be a good idea to just have a new assembly and float verse my 22 year old one. Well that didn't pay off. The wired connector that the pump connects to on the new replacement assembly is a completely different style connector than the factory one and the DW 340lph pump. I reached out to both DW and the assembly maker (1A Auto.) to see what is going on. I have yet to hear back from Deatschwerks, but 1A auto has been in contact with me, still trying to figure it out.
I do see on Deatschwerks page for this pump, it shows a small pigtail harness that can be spliced in. My pump did not come with this harness. I also would like to avoid having to splice any wires that sit inside the fuel tank lol.
My only other hope is that the fuel pump assembly that is currently in my car, has the correct connector and I can just swap that over to the new tank. So much for a drop in install lol