Hey Guys, I'm having some difficulty in trying to remove my main harness. I'm planning on swapping it out for the Accel DFI gen. 7 I picked up a while back. The problem I'm having is trying to get the connector that plugs into the computer out from under the passenger side dash through the firewall. The ventilation duct work is right up against the backside of the firewall (Inside the cabin). Any suggestions or pointing my in the right direction would be greatly appreciated!!! Forseth
That part of the harness is a pain in the ass to remove. The last time I removed that harness from a was in 2009. I dont remember how I did it, but I do remember it being a pain. Try to pull it from the passenger footwell, instead of through the fire wall.