Mach5Racing4
New Member
- Joined
- May 6, 2007
- Messages
- 24
- Reaction score
- 0
there is the red power cable going to the pos. terminal on the starter solonoid and a black wire with a spade connector going to the spade on the solonoid. i just used a jumper cable to go from the battery to the spade on the solonoid. when that was connected it turned over. but then i used a jumper cable to ground the starter bolt to the frame and it started sparking. so the entire engine trans and drive shaft have power running through them. i have never seen anything like it. all i can think of is the wire i used from the summit racing trunk mount battery kit has a hole in it and its grounding to the frame. has anyone had this happened or heard of this? thanks