I had installed the hinge repair kit on the driver side door 8 or 9 years ago and i know i wasnt gunna go through that again.
for a few years, i have been battling the dreaded door sag on the passenger side. I finally had it, and got tired of people spamming my door shut, or myself, to close it. I stopped off at the upullit yard. and snagged up a few parts including the hinges.
gave the hinges a coat of paint.
Was a little worried on how it would all come apart with out scratching something. Once i got the wheel, fender, inner fender and fender extension off, I had all the room needed to attack the task. I had to remove the inside kick panel inorder to get the lower hinge off as well.
I recommend to anyone who does this, have a second set of hand. What a pain in the ass!!!
I got the new hinges in place and was time to square up the door and fender.
All back together..... Sorta...
Found out my gaps werent well for the door and the door and quarter were touching.
All back apart to recenter the door and get the gaps correct.
Gaps correct. Ran into another problem.
The glass would hit the body and not allow it to close. I kept trying to adjust the window stops but the window stops were already maxed out. Had my dad a glass installer look at whole window assmebly... Found out the down had come unglued.
All glued, reassembled, and fitted!!!!
All fixed and closes smoothly
http://vid1008.photobucket.com/albums/af203/9838stang/received_10153210980980108_zpslmhyaksv.mp4