Guess my dyno numbers...win a T-shirt

[KidK9]

Thought I would add a fun thread. Guess my dyno numbers (rwhp only) EXACTLY and I'll send you a T-shirt of my company.

1994 Mustang Cobra 306ci.

Ported TMoss lower intake
MSD 6AL2
MSD Blaster Coil
42# Bosch Fuel Injectors
Anderson Powerpipe
Vortech V3si polished supercharger
Wazee pulley's
March Underdrive Pullys
Cervinis Ram Air Hood
Rear Seat Delete with 2 12" JL Audio subs and amplifier
18" XXR 530 Wheels
FMS 9mm Wires
Full Length Welded MAC Subframe Connectors
Maximum Motorsports Caster/Camber Plates
Maximum Motorsports LCAs
Maximum Motorsports Strut Tower Brace
MAC Ceramic Shorty Headers
MAC H-Pipe
FMS Aluminum Driveshaft
Corbeau Seats
MAC Short Throw Shifter
BBK 70mm Throttle Body
SCT 90mm MAF
Walbro 255 Fuel Pump
Aeromotive Fuel Rails
Braided Fuel Lines


Have fun! And no arguing!

 

[Mrstangerbanger]

350rwhp

 

[det_riot]

stock heads and cam?

 

[Mrstangerbanger]

stock heads and cam?

Thats why I put 350rwhp ..

If your running stock heads its going to kill your setup for sure .. 350rwhp is 400hp on motor.

But it also depend on how much boost your running and how much timing you run also ..

 

[castine917]

Also, what lower did Tmoss port?

 

[copmagnet]

367rwhp.

 

[JerZeyStangz]

410rwhp

 

[KidK9]

Stock heads and cam. Lower intake.

 

[castine917]

312 rwhp

 

[itsblue95]

even though its stock heads and cam they are gt40 heads. i say 413rwhp

 

[KidK9]

Thanks itsblue. I think a lot of people forget that. But we'll see!!

 

[castine917]

My numbers are a real low guess. I always guess low and usually end up happy with higher numbers.

 

[sleepn_sn95]

387rwhp

 

[itsblue95]

My numbers are a real low guess. I always guess low and usually end up happy with higher numbers.

this is what i did with my car. out of all my friends and myself i guess the least amount of hp and ended up really happy.

no problem man. what kind of dyno is it going on?

 

[KidK9]

Well there was a bit of a backup at the shop. I dropped it off on Monday and it was supposed to be all done on Friday, but as of today (Thursday) it hasn't been started. Oh well...we'll keep waiting.

 

[Shifty Powers]

391rwhp

 

[det_riot]

374

 

[Mrstangerbanger]

What size blower pulleys ?? If you break over 400 your luck for sure .. With stock Cobra long block 350 to 380 is normal for a blower car.. Car should run great thou

 

[KidK9]

Stock pulley from Vortech. I hope it puts up 400. A guy over on Stangnet put up 396 with a bone stock Cobra. And they shut it down at 5500rpm. I would love to put up 400.

So, here's a question for you gurus. Let's say I put up 390rhwp. Then in 8 months I put on Twisted Wedge heads and TFS Stage 1 cam. Would I be putting the block at risk? Would this push too close to 450rwhp?

 

[mobileaudio219]

369 hp..