??? So what intercooler kit did you buy and do you have to have a bigger then stock hood?
I bought a universal CXracing intercooler kit. seems to work pretty well, its about 20* over ambient at sustained WOT. it could fit under a stock hood if the piping was final fitted and messed with more.
How bad were you getting heat soak without the intercooler ?
um, it wouldnt heat soak so much as put out 200* discharge temps from the blower
Will the intercooler piping fit under stock hood?
Not really, lol, it was meant as a temporary setup, so it needs final fitting and setup
Why are you running a Foxbody computer and not a sn95 if you are using a moates chip and burner ?
cuz i was tired of messing with the SN95 computer that seemed to fight me at every step. it was really holding back the car. it will eventually have a BigStuff3.
So when you put a foxbody throttle body set up on did you just delete EGR? Wll your car pass smog?
haha, smog, wassat? it has the Fox style 80mm Accufab on it, and a plate that is custom made to mount the throttle cable. It does not have an EGR spacer, makes valve cover clearance much easier.
I was also looking at intercooler kit for my car but was thinking of meth instead .
Hm..... Idk about meth, of course, I like to have the least amount of moving parts possible.
Thanks
Also are you looking to sell some of your parts?
depends on what you are looking for. the T/B and custom parts there is not gonna go anywhere anytime soon.
What exactly do I need for a Foxbody Tbody >? Cable,Tbody,EGR spacer,?
exactly, all those parts. T/b, EGR spacer, a non SN95 specific manifold,a throttle cable and mount bracket, and a little patience
I was thinking of doing that because the discharge pipe on the sn95 vortech kit is a joke and really restrictive
ya, it is... and the fox setup is much better. I had a fox style elbow on there for a while, and it ran great with it. never messed with the SN95 setup really.