What Did You Do To Your Car Today?

Burninriverdiver

Well-Known Member
Joined
Jan 1, 2014
Messages
2,770
Reaction score
234
Nothing exciting to view but exciting for me to improve my lousy ride quality.... Replaced stock (156k mile) shocks,struts and inner/outer tie rod ends with new motorcraft parts. This should take care of the steering wheel play (inner tie-rod ends were loose enough to shake by hand)

 

RedTwilight

Active Member
Joined
Jun 12, 2011
Messages
635
Reaction score
56
Location
Roxboro, NC
Swapped the drag wheel and Tire setup out with the street setup on the notch now that the race season is over.

20161202_181148.jpg
[/URL][/IMG]
20161203_143435.jpg
[/URL][/IMG]
20161202_163615.jpg
[/URL][/IMG]
 

CRAZYHORSES

New Member
Joined
Nov 20, 2016
Messages
64
Reaction score
0
Location
HOUSTON / SPRING, TEXAS
I got rid of the stock oil dip stick tube that wouldn't fit with my headers and never read correct anyway. I replaced it with a Lokar dipstick that is way nicer
12_zpsdmrcyuze.png

11_zpssbf56g7k.png
 

Firefighter181

Active Member
Joined
Jun 15, 2013
Messages
426
Reaction score
4
What is the part number on the dipstick from Lokar if you don't mind me asking? I have to do the same thing this winter.
 

CRAZYHORSES

New Member
Joined
Nov 20, 2016
Messages
64
Reaction score
0
Location
HOUSTON / SPRING, TEXAS
What is the part number on the dipstick from Lokar if you don't mind me asking? I have to do the same thing this winter.
Lokar ED-5004. Found a dealer on eBay for $49. The old one pulled out fairly easy from under the car and the Lokar I installed by pushing and turning a bit from the top-side. I oiled up the base and O-rings before installation.
 

Burninriverdiver

Well-Known Member
Joined
Jan 1, 2014
Messages
2,770
Reaction score
234
Uh.....tech write?

Nice work! Now hows about a tech write up on that!

Thanks man! I actually used the write up on this site for the COP harness, it was spelled out in an easy step by step guide. I used the site below (second time around) to have closer to exact measurements on wire length to make it cleaner/ use thicker gauge wires.

http://www.crownvic.net/drock96marquis/COPconv.htm
 

wmfateam

Active Member
Joined
Aug 23, 2013
Messages
807
Reaction score
123
Location
Gilbert, AZ
62e472390d4db2abdf6eb3177ef4543f.jpg

Went to install this little thing before dinner and was shot down by the update. Tomorrow I guess.

Sent from my XT1254 using Tapatalk
 

ttocs

Post Whore
Joined
Oct 9, 2009
Messages
32,763
Reaction score
5,712
Location
Evansville Indiana
I laid in the hospital dreaming of wiring my holley system. Got the relay box and wired it up. Got the fuse box and drew up a schematic for all the wiring. And then laid here....

But wish me luck they are going to a follow through test in the morning and maybe a test will show something someday.....
 

evilcw311

Most Evil Member!
SN95 Supporter
Joined
May 9, 2010
Messages
7,456
Reaction score
2,136
Location
Louisville, KY
I thought about my beast while purchasing about 300lbs of sexiness to slide up under her ass!!!!! :)


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
77,574
Messages
1,505,176
Members
15,037
Latest member
RevJon

Members online

Top